TELLURE ROTA
Industrial wheels
manual handling
Industrial wheels
mechanical handling
Standard
ISO 22883
ISO 22884
Test load
Rated carrying capacity
Test speed
4 km/h
A= 6 km/h; B = 10 km/h; C= 16 km/h
Env. temperature
Between 15 and 28 °C
Floor
Hard floor with obstacles
Height of obsta-
cles
5% of the wheel diameter for soft rolling strip (hardness <= 90 ShA); 2.5% of the wheel
diameter for hard rolling strip (hardness > 90 ShA)
Layout of obsta-
cles
width 100 mm, rounded corners with radius between 1.5 and 5 mm and arranged 45
degrees with respect to the translation axis and in an alternating pattern to the right
and to the left
Quantity of ob-
stacles
500 obstacles separated from each
other between 1 and 3 m
5 times the wheel diameter in mm (e.g. one
wheel diam. 200 mm must pass 1,000 obsta-
cles); the obstacles are spaced out: >= 1 m;
B>= 1.5 m; >= 3 m
Duration
Sequence of cycles with a maximum
duration of 3 min., with a maximum
pause time of 1 min.. The wheel must
pass the foreseen obstacles, and com-
plete 15,000 revs without obstacles.
Sequence of cycles with a maximum dura-
tion of 3 min., with a maximum pause time
of 1 min.. The wheel must pass the foreseen
obstacles, and complete 15,000 revs without
obstacles.
The quality of the Tellure Rôta products is guaranteed by in-house testing proce-
dures that include acceptance tests on raw materials and of all other purchased
components, tests on semi-finished products in various stages of the process and
tests on the finished product.
The “Test & Research” laboratory is equipped with testing machines and benches
for in-house testing as provided by the international standards in the wheels and
brackets sector and of specific application sectors.
Specifically:
•
Dynamic load test on wheels and brackets for the industrial sector in accord-
ance with Standard ISO 22883:2004 or ISO 22884:2004
•
Dynamic load test on wheels and brackets for the waste collection container
sector in accordance with UNI EN 840-5:2013
•
Dynamic load test on wheels and brackets for the institutional sector in accord-
ance with ISO 22881:2004
•
Conformity tests on wheels and brackets for the mobile scaffolding sector in
accordance with Standard UNI EN 1004:2005;
•
Rolling resistance tests on wheels and brackets for the industrial sector in ac-
cordance with UNI 11330:2009;
•
Braking efficiency and engagement tests of the braking device in accordance
with ISO 22883:2004 or ISO 22884:2004;
•
Static load tests on wheels for the institutional sector in accordance with ISO
22881:2004
The following layout describes the tests made in accordance with the sector standards,
in order to determine the industrial wheels' carrying capacity stated in the catalogue.
|
43
For any further details or explanations contact Tellure Rôta Sales Department.