TELLURE ROTA
TELLURE RÔTA HUBS AND AXLE SETS
Hub with plain bore
Suitable for applications involving non-continuous movements and lim-
ited loads.
The relative sliding friction coefficient range is b= 0.003-0.005.
The plain bearing can be joined directly to the wheel bore. The axle set is made with a
calibrated and machined tube to create a homogeneous and precision bearing cou-
pling surface. Acting like a spacer, the tube is inserted into the bearing and tightened
to the bracket using a screw and nut up to the predefined torque setting. The bearing
slides freely on the tube. Axle sets can be supplied in the galvanised steel or stainless
steel version. The centre of model P64 C/B is specifically dimensioned to obtain the
variations for spline and key housing in the precision hole, in order to make this a
drive wheel.
Hub with roller bearings
Suitable for applications involving non-continuous
movements and heavier loads respect to wheels with
hub with plain bore, as it guarantees low friction coeffi-
cients even in the presence of heavy loads.
The indicative sliding friction coefficient is b=0.0025.
The bearing with steel cylindrical rollers or stainless steel rollers, with plastic
cage is assembled in the seat specifically obtained on the hub. The axle set is
made with a calibrated and machined tube to create a homogeneous and pre-
cision roller bearing coupling surface.
Acting like a spacer, the tube is inserted into the roller bearing and tightened to
the bracket using a screw and nut up to the predefined torque setting. The roll-
er bearing slides freely on the tube. Axle sets can be supplied in the galvanised
steel or stainless steel version.
30
| Catalogue 02/2016