SIEMENS
8/14
Siemens KT 10.1 · 2016
8
SITOP in the SIMATIC Design
3-phase, 24 V DC (for ET200pro)
■
Overview
The SIMATIC ET200pro PS power supply unit with degree of
protection IP67 is used as the electronics/encoder supply and
load voltage supply of the new SIMATIC ET 200pro distributed
I/O system for use close to the machine without a cabinet. With
a signaling contact for "24 V OK" and "Overtemperature", as well
as a second plug-in connector for input voltage loop-through.
■
Technical specifications
Article number
6ES7148-4PC00-0HA0
Product
SIMATIC ET200pro PS
Power supply, type
24 V/8 A
Input
Input
3-phase AC
Rated voltage value
V
in rated
400 ... 480 V
Voltage range AC
340 ... 550 V
• Note
320 ... 340 V for max. 1 min
Wide-range input
Yes
Overvoltage resistance
Implemented internally with varistors
Mains buffering at
I
out rated
, min.
15 ms; at
V
in
= 400 V
Rated line frequency 1
50 Hz
Rated line frequency 2
60 Hz
Rated line range
45 ... 66 Hz
Input current
• at rated input voltage 400 V
0.5 A
Switch-on current limiting (+25 °C),
max.
40 A
I²t, max.
3.5 A²·s
Built-in incoming fuse
T 4 A
Protection in the mains power input
(IEC 898)
Required: Circuit breaker
3RV2011-1DA10 or 3RV2711-1DD10
(UL 489)
Output
Output
Controlled, isolated DC voltage
Rated voltage
V
out
DC
24 V
Total tolerance, static ±
3 %
Static mains compensation, approx.
0.5 %
Static load balancing, approx.
0.5 %
Residual ripple peak-peak, max.
200 mV
Spikes peak-peak, max.
(bandwidth: 20 MHz)
250 mV
Product function
Output voltage adjustable
No
Output voltage setting
-
Status display
Green LED for 24 V OK
Signaling
max. 30 V, 10 mA; Power-Good
(High-Pegel 1L+ for
V
out
in range
21.3 ... 29 V); Overtemperature
warning at least 30 s before
switch-off (high level 1L+ when the
max. internal temperature is
exceeded)
On/off behavior
Overshoot of
V
out
< 2 %
Startup delay, max.
1.5 s
Voltage rise, typ.
40 ms
Rated current value
I
out rated
8 A
Current range
0 ... 8 A
Supplied active power typical
192 W
Short-term overload current
• on short-circuiting during the
start-up typical
50 A
• at short-circuit during operation
typical
50 A
Duration of overloading capability for
excess current
• on short-circuiting during the
start-up
100 ms
• at short-circuit during operation
100 ms
Parallel switching for enhanced
performance
No
© Siemens AG 2016