SIEMENS
5/121
Siemens NC 62 · 2016
5
SINAMICS S120 drive system
Supplementary system components
TM15 Terminal Module
■
Overview
TM15 Terminal Module
The number of available digital inputs and outputs within a drive
system can be expanded with the TM15 Terminal Module.
■
Design
The following are located on the TM15 Terminal Module:
•
24 bidirectional digital inputs/outputs
(isolation in 3 groups with 8 channels each)
•
24 green status LEDs for indicating the logical signal status
of the relevant terminal
•
2 DRIVE-CLiQ sockets
•
1 connection for the electronics power supply via the
24 V DC supply connector
•
1 PE connection
The status of the TM15 Terminal Module is indicated via a
multi-color LED.
The TM15 Terminal Module can be snapped onto a TH 35
standard mounting rail in accordance with EN 60715
(IEC 60715).
The signal cable shield can be connected to the TM15 Terminal
Module via a shield connection terminal, e.g. type SK8 supplied
by Phoenix Contact or type KLBÜ CO 1 supplied by Weidmüller.
The shield connection terminal must not be used as a strain relief
mechanism.
■
Integration
The TM15 Terminal Module can communicate via DRIVE-CLiQ
with the following Control Units.
•
CU310-2 Control Unit
•
CU320-2 Control Unit
•
SINUMERIK Control Unit
■
Technical specifications
■
Selection and ordering data
1)
The specified delay times refer to the hardware. The actual reaction time
depends on the time slot in which the digital input/output is processed.
Article No.
6SL3055-0AA00-3FA0
Product designation
TM15 Terminal Module
Power requirement, max.
at 24 V DC without load
0.15 A
• Conductor cross-section, max.
2.5 mm
2
• Fuse protection, max.
20 A
Number of DRIVE-CLiQ sockets
2
I/O devices
• Digital inputs/outputs
Can be parameterized channel-
by-channel as DI or DO
• Number of digital inputs/outputs
24
• Electrical isolation
Yes, in groups of 8
• Connection method
Plug-in screw-type terminals
• Conductor cross-section, max.
1.5 mm
2
Digital inputs
• Voltage
-30 ... +30 V
• Low level
(an open digital input is interpreted
as "low")
-30 ... +5 V
• High level
15 ... 30 V
• Current consumption
at 24 V DC
5 ... 11 mA
• Delay times
of digital inputs, typ.
1)
- L
→
H
50
µ
s
- H
→
L
100
µ
s
Digital outputs
(continuously short-circuit-proof)
• Voltage
24 V DC
• Load current
per digital output, max.
0.5 A
• Delay times
(resistive load)
1)
- L
→
H, typ.
50
µ
s
- L
→
H, max.
100
µ
s
- H
→
L, typ.
150
µ
s
- H
→
L, max.
225
µ
s
• Total current of the outputs
(per group), max.
-
Up to 60 °C (140 °F)
2 A
-
Up to 50 °C (131 °F)
3 A
-
Up to 40 °C (104 °F)
4 A
Power loss, max.
3 W
PE connection
M4 screw
Dimensions
• Width
50 mm (1.97 in)
• Height
150 mm (5.91 in)
• Depth
111 mm (4.37 in)
Net weight
0.86 kg (1.90 lb)
Certificate of suitability
cULus
Description
Article No.
TM15 Terminal Module
Without DRIVE-CLiQ cable
6SL3055-0AA00-3FA0
Accessories for re-ordering
SINAMICS/SINUMERIK/SIMOTION
dust-proof blanking plugs
For DRIVE-CLiQ port
• 6 units
6SL3066-4CA01-0AA0
• 50 units
6SL3066-4CA00-0AA0
© Siemens AG 2016