SIEMENS
4/15
Siemens NC 62 · 2016
4
SINUMERIK Integrate
Integrate for engineering
Access MyMachine /P2P
■
Overview
Commissioning support and remote diagnostics with
SINUMERIK Operate
SINUMERIK Integrate Access MyMachine /P2P supports the
commissioning of machines with SINUMERIK Operate (software
version 2.6 and higher) using a standard Windows PC. Its scope
of functions includes the exchange of files between the service
PC and the control as well as operation of the HMI user interface.
EasyScreen texts, alarm texts, tool management texts and other
texts can be edited easily.
The file exchange functionality permits access from the NCU to
files stored on the CF card and to files in the NCK. Various user
profiles are also supported.
The file exchange only requires the Access MyMachine /P2P
software. This is installed on the PC (direct access via X127 with-
out a TS adapter does not
require the Access MyMachine /P2P
option).
If remote access, e.g. via modem, to the HMI user interface is
required, the approved modem for this application is the TS
Adapter IE (2 versions: analog and ISDN telecommunication
networks, only via the X127 service interface)
(requires Access MyMachine/P2P option).
■
Benefits
Cost savings in service thanks to:
7
Less frequent service calls for the machines
7
More efficient deployment of on-site service personnel
7
Better preparation of service calls
Machine availability is enhanced thanks to:
7
Rapid online presence on site
7
Rapid file transfer to and from the machine
■
Function
Remote control, monitoring and administration
•
File transfer to CF card and CNC file system
•
Connection is established following confirmation by the
operator
•
Status display on the operator panel
•
Optional teleservice software:
(requires Access MyMachine /P2P option)
Machine connections can be maintained centrally and access
data administered via remote connections.
File functions
Access
MyMachine
/P2P allows simple file management on your
PC and on the SINUMERIK control systems.
•
Data transfer between SINUMERIK and PC, data transfer to
CF card and CNC file system.
•
Generation and restoration of images from the CF card of the
CNC control for data backup purposes.
•
Writing existing images to a CF card.
•
Loading files directly to the control system and from the
CNC control to the PC.
Support during commissioning
•
Managing the CNC data of the CNC control.
•
Files can be copied directly from the PC to the CNC, and from
the CNC to the PC.
•
Monitoring processes and remote control of the SINUMERIK
via a remote control function.
•
Saving the screenshot of the HMI on the PC.
Presentation of the CNC control and better support in the
event of a fault
•
Editing the following user files on the PC:
- PLC alarm texts (oem_alarms_plc)
- Cycle alarm texts (oem_alarms_cycles)
- Part program messages (oem_partprogram_messages)
- EasyScreen files
- Tool management texts
- EasyExtend files (oem_aggregate)
- Maintenance planner files (oem_maintenance)
•
Creating and loading an archive on the CNC control
•
Managing user files with the following options:
- Creating a project OFFLINE
- Creating a project where the files are automatically copied
from the CNC control
- Copying individual files to the CNC control with the project
dialog, or copying from the CNC control to the project
- Deleting user files using the project dialog on the CNC
control
© Siemens AG 2016