SIEMENS
3/25
Siemens NC 82 · 2017
3
SINUMERIK CNC controls
SINUMERIK I/O
SINUMERIK I/O modules PP 72/48D PN and PP 72/48D 2/2A PN
■
Overview
SINUMERIK PP 72/48D PN I/O module
The SINUMERIK PP 72/48D PN I/O module is available in a
digital variant with 72 inputs and 48 outputs, and in a digital/
analog variant PP 72/48D 2/2A PN with 2 analog inputs and
2 analog outputs in addition.
The I/O modules are connected to the CNC via a PROFINET-
based I/O interface. The digital inputs and outputs are
connected by means of three 50-pin ribbon cables. Terminal
strip converters can be used or the direct connection of
distribution boards, for example, is possible.
■
Benefits
7
Easy connection via PROFINET-based I/O interface
7
Mounting plate for easy module installation in the control
cabinet
7
Automatic module detection by the CNC, no complex
configuring required
7
Easy connection of terminal strip converters to plug
connectors
7
Integrated 24 V DC power supply with electrical isolation
between the inputs and outputs and PROFINET
■
Integration
The PP 72/48D PN and PP 72/48D 2/2A PN I/O modules can be
used for the following CNCs:
•
SINUMERIK 828D BASIC
•
SINUMERIK 828D
■
Selection and ordering data
1)
For complete Article No. and length code, see
MOTION-CONNECT connection systems
Description
Article No.
SINUMERIK PP 72/48D PN
I/O module
72 digital inputs and
48 digital outputs
6FC5311-0AA00-0AA0
SINUMERIK PP 72/48D 2/2A PN
I/O module
72 digital inputs and
48 digital outputs
2 analog inputs and
2 analog outputs
6FC5311-0AA00-1AA0
Accessories
Terminal strip converter
50-pin
6EP5406-5AA00
Cable set
Ribbon cable 50-pin,
length 6 m,
8 insulation displacement connectors,
50-pin
6EP5306-5BG00
DRIVE-CLiQ signal cable,
pre-assembled
For PROFINET connection
• In fixed lengths
1)
Connector degree of protection IP20
6SL3060-4A..0-0AA0
• In precise decimeter lengths
1)
-
Connector degree of protection IP20
6FX2002-1DC00-
....
-
Connector degree of protection IP67
6FX2002-1DC20-
....
© Siemens AG 2016