SIEMENS
3/19
Siemens NC 82 · 2017
3
SINUMERIK CNC controls
Operator components
SINUMERIK MCP 483 USB
■
Overview
The SINUMERIK MCP 483 USB machine control panel enables
user-friendly operation of the machine functions. It can be used
with a SINUMERIK 828D CNC for machine-related operation of
turning, grinding and milling machines. The machine-specific
keys have replaceable slide-in labels so that they can be
adapted.
The machine control panel is mounted from the rear with special
clamps supplied with the panel. The emergency stop mushroom
pushbutton can be ordered as an accessory.
■
Design
Operator control and display elements:
•
Mode selectors and function keys:
- 40 keys with LEDs
- Predefined keys for common functions, e.g. reset key,
program control
- Key group for operating as milling or turning machine. The
slide-in labels for keys for milling or turning machines are
included in the accessories pack.
- Keys for individual use
•
Spindle control with spindle override
(rotary switch with 15 positions)
•
Feedrate control with feedrate/rapid traverse override
(rotary switch with 18 positions)
•
2-digit, 7-segment display for the tool number
Key type:
•
Membrane keys with protective film
Interface:
•
USB 2.0 for communication with the SINUMERIK PPU:
Transmission rate 12 Mbit/s
Expansion options:
•
1 slot for emergency stop button, e.g. switch (
d
= 22 mm)
•
2 slots for control devices, e.g. switches (
d
= 16 mm)
■
Integration
The SINUMERIK MCP 483 USB machine control panel can be
used with:
•
SINUMERIK 828D BASIC
- PPU 241.3
•
SINUMERIK 828D
- PPU 281.3
■
Technical specifications
■
Selection and ordering data
Article No.
6FC5303-0AF32-0AA0
Product brand name
SINUMERIK
Short product code
MCP 483 USB
Product designation
Machine control panel
Supply voltage at DC
5 V
Active power consumption maximum
2.5 W
Degree of protection
• front
IP65
- Note
With mounted emergency stop
pushbutton
• rear
IP20
Environmental category acc. to
IEC 60721-3-3
Condensation and icing excluded.
Low air temperature 0 °C.
Relative humidity at 25 °C, during
• storage
5 ... 95 %
• transport
5 ... 95 %
• operation
5 ... 85 %
Ambient temperature, during
• storage
-40 ... +70 °C
• transport
-40 ... +70 °C
• operation
- front
0 ... 45 °C
- rear
0 ... 55 °C
Width
483 mm
Height
155 mm
Depth
49 mm
Net weight
1.22 kg
Certificate of suitability
CE, cULus, EAC, KCC, RCM
Description
Article No.
SINUMERIK MCP 483 USB
machine control panel
USB 2.0, width 483 mm,
with membrane keys including USB cable
length 0.8 m
6FC5303-0AF32-0AA0
Accessories
Emergency stop mushroom
pushbutton, 22 mm
Plastic, round, red, positive latching,
rotate to unlatch, complete with holder
3SB3000-1HA20
Contact block with 2 contacts
1 NO + 1 NC,
2-pin, screw terminal
3SB3400-0A
© Siemens AG 2016