SIEMENS
9/7
Siemens D 21.4 · 2017
SIMOTICS main motors
SIMOTICS M asynchronous and synchronous motors for SINAMICS S120
SIMOTICS M-1PH8 asynchronous and synchronous motors, water cooling
9
■
Technical specifications
(continued)
SIMOTICS M-1PH8 motor, water cooling
Stator winding insulation
in accordance with EN 60034-1 (IEC 60034-1)
For a coolant inlet temperature up to 30 °C (86 °F)
Temperature class 180 (H)
2)
Cooling
according to EN 60034-6 (IEC 60034-6)
Water cooling
Max. cooling water pressure at inlet: 6 bar
Connecting thread at NDE
Temperature monitoring
• 1PH808 ... 1PH816
• 1PH818 ... 1PH828
Pt1000 temperature sensor in the stator winding
1 additional Pt1000 as reserve
Type of construction
in accordance with EN 60034-7 (IEC 60034-7)
• 1PH808
• 1PH810 ... 1PH828
IM B3, IM B5
IM B3, IM B5, IM B35
Degree of protection
in accordance with EN 60034-5 (IEC 60034-5)
• 1PH808 ... 1PH816
• 1PH818 ... 1PH828
IP65
IP55
Shaft extension on the drive end
in accordance with DIN 748-3 (IEC 60072-1)
Plain shaft or feather key,
full-key or half-key balancing for feather key
Shaft and flange accuracy
in accordance with DIN 42955 (IEC 60072-1)
1)
Without holding brake: Tolerance R (reduced)
With holding brake: Tolerance N (normal)
Vibration severity
in accordance with Siemens/EN 60034-14 (IEC 60034-14)
1)
Sound pressure level
L
pA
(1 m)
in accordance with DIN EN ISO 1680, max.
Tolerance +3 dB
• 1PH808 ... 1PH813
• 1PH816
• 1PH818
• 1PH822
• 1PH828
68 dB at a rated pulse frequency of 4 kHz and a speed range up to 5000 rpm
69 dB at a rated pulse frequency of 4 kHz and a speed range up to 5000 rpm
70 dB at a rated pulse frequency of 2 or 4 kHz and a speed range up to 5000 rpm
70 dB at a rated pulse frequency of 2 or 4 kHz and a speed range up to 4500 rpm
72 dB at a rated pulse frequency of 2 kHz and a speed range up to 3300 rpm
Built-in encoder systems
Absolute and incremental encoder with or without DRIVE-CLiQ interface
Connection
Connector for signals or DRIVE-CLiQ interface
(mating connector not included in the scope of supply)
Power
• 1PH808 ... 1PH813
• 1PH816 ... 1PH828
Power connector or terminal box
Terminal box
Fan
• 1PH808
• 1PH810 ... 1PH813
• 1PH816 ... 1PH828
Power connector
Power connector or terminal box
Terminal box
Encoder system
Connector for signals or DRIVE-CLiQ interface
(mating connector not included in the scope of supply)
Rating plate
1 attached to motor
1 supplied separately with terminal box
Paint finish
Standard paint finish in anthracite RAL 7016
Certificate of suitability
cURus, CE, EAC
1)
Shaft extension run-out, concentricity of centering ring and shaft, and per-
pendicularity of flange to shaft.
2)
The following motors are designed to conform to temperature class 155 (F):
1PH8107-1.F2/1PH8107-1.M2
1PH8138-2.F2/1PH8138-2.G2
1PH8164/1PH8166/1PH8168
© Siemens AG 2017