SIEMENS
7/25
Siemens D 21.4 · 2017
SINAMICS S120 drive system
Control Units
CBC10 Communication Board
7
■
Overview
CBC10 Communication Board
The CBC10 Communication Board is used to interface the
CU320-2 Control Unit and therefore the drive system to the CAN
(Controller Area Network) protocol. The board's driver software
fulfills the standards of the following CANopen specification of
the CiA organization (CAN in Automation):
•
Communication profiles in accordance with DS 301
•
Drive profile in accordance with DSP 402
(in this case Profile Velocity Mode)
•
EDS (Electronic Data Sheet) in accordance with DSP 306
•
Operational status signaling in accordance with DSP 305
Note:
The CAN address is set on the CU320-2 DP Control Unit by
means of the two address switches.
These address switches are not available on the CU320-2 PN
Control Unit. In this case, the address can be set by means of
parameters.
■
Integration
The CBC10 Communication Board plugs into the option slot on
the CU320-2 Control Unit. Two SUB-D connections for input and
output are provided for the CAN interface on the CBC10
Communication Board.
■
Selection and ordering data
■
Technical specifications
Description
Article No.
CBC10 Communication Board
6SL3055-0AA00-2CA0
CBC10
Communication Board
6SL3055-0AA00-2CA0
Current requirement, max.
at 24 V DC
via Control Unit CU320-2
0.05 A
Power loss, max.
3 W
Weight, approx.
0.1 kg (0.22 lb)
Certificate of suitability
cULus
© Siemens AG 2017