SIEMENS
7/282
Siemens D 21.4 · 2017
SINAMICS S120 drive system
Supplementary system components
TM15 Terminal Module
7
■
Overview
TM15 Terminal Module
The number of available digital inputs and outputs within a drive
system can be expanded with the TM15 Terminal Module.
■
Design
The TM15 Terminal Module is equipped with the following:
•
24 bidirectional digital inputs/outputs (electrical isolation in
3 groups with 8 channels per group)
•
24 green status LEDs for indicating the logical signal state of
the corresponding terminal
•
2 DRIVE-CLiQ sockets
•
1 connection for the electronics power supply via the 24 V DC
power supply connector
•
1 PE (protective earth) connection
The status of the TM15 Terminal Module is indicated via a
multi-color LED.
The TM15 Terminal Module can be snapped onto a TH 35
standard mounting rail in accordance with EN 60715
(IEC 60715).
The signal cable shield can be connected to the TM15 Terminal
Module by means of a shield connection terminal, e.g. Phoenix
Contact type SK8 or Weidmüller type KLBÜ CO 1. The shield con-
nection terminal must not be used as a strain relief mechanism.
■
Selection and ordering data
■
Technical specifications
Description
Article No.
TM15 Terminal Module
Without DRIVE-CLiQ cable
6SL3055-0AA00-3FA0
Accessories for re-ordering
Dust protection blanking plugs
(50 units)
For DRIVE-CLiQ port
6SL3066-4CA00-0AA0
TM15 Terminal Module
6SL3055-0AA00-3FA0
Current requirement, max.
at 24 V DC without load
0.15 A
• Conductor cross-section, max.
2.5 mm
2
• Fuse protection, max.
20 A
Number of DRIVE-CLiQ sockets
2
I/O
• Digital inputs/outputs
Parameterizable channel-by-
channel as DI or DO
• Number of digital inputs/outputs
24
• Isolation
Yes, in groups of 8
• Cables and connections
Plug-in screw-type terminals
• Conductor cross-section, max.
1.5 mm
2
Digital inputs
• Voltage
-30 ... +30 V
• Low level
(an open digital input is interpreted
as "low")
-30 ... +5 V
• High level
15 ... 30 V
• Current consumption at 24 V DC
9 mA
• Delay times of digital inputs, typ.
1)
- L
→
H
50
μ
s
- H
→
L
100
μ
s
Digital outputs
(continuously short-circuit proof)
• Voltage
24 V DC
• Load current per digital output, max.
0.5 A
• Delay times (resistive load)
1)
- L
→
H, typ.
50
μ
s
- L
→
H, max.
100
μ
s
- H
→
L, typ.
150
μ
s
- H
→
L, max.
225
μ
s
• Total current of outputs
(per group), max.
-
To 60 °C (140 °F)
2 A
-
To 50 °C (122 °F)
3 A
-
To 40 °C (104 °F)
4 A
Power loss, max.
3 W
PE connection
M4 screw
Dimensions
• Width
50 mm (1.97 in)
• Height
150 mm (5.91 in)
• Depth
111 mm (4.37 in)
Weight, approx.
1 kg (2.20 lb)
Certificate of suitability
cULus
1)
The specified delay times refer to the hardware. The actual reaction time
depends on the time slot in which the digital input/output is processed.
© Siemens AG 2017