![](https://www.globalindustrialsupplies.eu/wp-content/uploads/2016/08/siemens-gallery-4-324x200.jpg)
4/3
Siemens D 15.1 · 2017
Description of Options
Description of options
4
■
Options
(continued)
B43 to B45
Production schedules
Mutually exclusive options
B43
to
B45
Options
B43
to
B45
provide production schedule documents.
These are sent via E-Mail as PDF file in English after order
clarification.
B49
Manufacturer data book
With option
B49
, a printed manufacturer data book will be
provided with the following content:
•
Test certificates for the drive and its main components
•
Report of the drive type test
This document is used to verify that all quality assurance mea-
sures were performed during production. This is not part of the
documentation on the CD-ROM and will be supplied separately.
Note:
The manufacturer data book is not included when testing the
options
F03
to
F97
(drive acceptance test, witnessed).
D00 to D95
Documentation
Mutually exclusive options
D00
to
D95
Note
:
The language options
D00
,
D54
to
D75
and
D77
to
D95
are mu-
tually exclusive, but can be combined with option
D76
as a sec-
ond documentation language.
In case that option
D00
or one of the options
D54
to
D95
is or-
dered, the operating instructions, safety notes on the drive are
delivered according to the ordered language option. This option
has to be selected (mandatory option) if the country of the end
customer is an EU country.
The quality documents (e.g. approval, certificates, etc) and the
technical documents (e.g. circuit diagrams, dimensional draw-
ings, etc) are only available in English or German. Supplemen-
tary documentation for the components installed in the drive
(provided by the manufacturers of these components) is in-
cluded on the CD-ROM in English/German. For technical rea-
sons, it is not possible to restrict the scope of this supplementary
documentation to just the options that the customer has ordered.
Production schedule documentation
Code
B43
B44
B45
One issue
B43
–
–
Updated at 2-week intervals
B44
–
–
Updated once per month
B45
–
–
–
Options are mutually exclusive.
Option
Description
B43
Production schedule: one issue
B44
Production schedule: updated at 2-week intervals
B45
Production schedule: updated once per month
Option
Description
D00
Documentation in German
With order code
D00
, the documentation is supplied in
German on CD-ROM.
D02
Circuit diagram, terminal diagram and dimension drawing
in dxf format
Documents such as circuit diagrams, terminal diagrams, the
arrangement diagram and the dimension drawing can be
ordered with order code
D02
in DXF format, e.g. for use in
AutoCAD systems.
D15
One set of printed documentation in the selected language
(multiple copies can be ordered)
If documentation is also required on paper, this must be
ordered using order code
D15
.
D54
Documentation in Czech
D55
Documentation in Polish
D56
Documentation in Russian
D62
Documentation in Danish
D71
Documentation in Romanian
D72
Documentation in Italian
D73
Documentation in Finnish
D74
Documentation in Dutch
D75
Documentation in Turkish
D76
Documentation in English
If a documentation language other than English is selected
(options
D00
or
D54
to
D87
), an additional CD-ROM with
documentation in English as second documentation language
can be ordered by specifying order code
D76
.
Note:
If option
D15
(one set of printed documentation) is selected
simultaneously, the printed documentation will be delivered in
the first documentation language only.
D77
Documentation in French
D78
Documentation in Spanish
D79
Documentation in Portuguese
D80
Documentation in Bulgarian
D81
Documentation in Norwegian
D82
Documentation in Hungarian
D83
Documentation in Swedish
D84
Documentation in Chinese
D85
Documentation in Slovenian
D86
Documentation in Greek
D87
Documentation in Slovakian
D88
Documentation in Estonian
D89
Documentation in Latvian
D90
Documentation in Lithuanian
D95
Documentation in Croatian
© Siemens AG 2017