![](https://www.globalindustrialsupplies.eu/wp-content/uploads/2016/08/siemens-gallery-4-324x200.jpg)
6/26
Siemens D 31 · 2015
6
SINAMICS G110M distributed inverters
0.37 kW to 4 kW (0.5 hp to 5 hp)
Compatible motors SIMOTICS
■
Overview
Compatible motors for SINAMICS G110M
Motors compatible with SINAMICS
G110M are listed individually
in the table below.
Due to the specific properties of the SINAMICS G110M, the
following comments and restrictions apply to the options and
devices used with the motors:
•
Note mounting position when encoders are used
•
The brake lever cannot be positioned at 12 o'clock owing to
the position of the inverter terminal enclosure.
•
24 V DC brake voltage not possible.
•
230/400 V AC brake voltage not possible for a motor on which
a CU240M Control Unit is mounted
•
Standby heating is not permitted for the motor
•
External motor fan cannot be mounted if the terminal
enclosure is mounted in the 12 o'clock position
•
Motor terminal box must be located at NDE
Rules for the use of 2- and 4-pole motors with 50 Hz 400 V 3 AC
•
Rated output current of the inverter
≥
rated input current of the
motor
•
Mechanical execution of the motor: Utilization of
SINAMICS G100M only in conjunction with motors
SIMOTICS GP-1LA, frame size 71 or SIMOTICS GP-1LE,
frame sizes 80, 90, 100 or 112
•
This motor configuration is only possible with terminal box at
NDE – see figure below. Following options are available when
motor is selected - for SIMOTICS GP-1LA motors select option
M64
, for SIMOTICS GP-1LE motors select option
H08
(in
preparation for 1LE1 motors with frame sizes 80 and 90).
Terminal box
Standard DE terminal box
(not possible)
NDE terminal box
1LA motor: Option
M64
1LE motor: Option
H08
(
H08
in preparation for 1LE1 motors
frame sizes 80 and 90).
© Siemens AG 2014