SIEMENS
6/7
Siemens D 31 N · March 2016
6
SINAMICS G110M distributed inverters
0.37 kW to 4 kW (0.5 hp to 5 hp)
SINAMICS G110M distributed frequency inverters
■
Technical specifications
Unless explicitly specified otherwise, the following technical specifications are valid for all the following SINAMICS G110M
distributed inverter components listed here.
1)
In product packaging.
2)
For further general information,
see also chapter SINAMICS G120,
section Technical specifications, Compliance with standards.
3)
With shielded motor cable up to 5 m (16.41 ft).
SINAMICS G110M
Mechanical specifications
Vibratory load
• Transport acc. to EN 60721-3-2
1)
Class 1M2
• Operation acc. to EN 60721-3-3
Class 3M3
Shock load
• Transport acc. to EN 60721-3-2
1)
Class 1M2
• Operation acc. to EN 60721-3-3
Class 3M3
Ambient conditions
Protection class according to EN 61800-5-1
Class III (PELV)
Touch protection according to EN 61800-5-1
Class I (with protective conductor system)
Permissible ambient and coolant temperature (air)
during operation for Power Modules
-10 ... +40 °C (14 ... 104 °F) without derating
>40 ... 55 °C (104 ... 131 °F)
see derating characteristics
Permissible ambient and coolant temperature (air)
during operation for Control Units
-10 ... +55 °C (14 ... 131 °F) without derating
Humidity, max.
95 % at 40 °C (104 °F)
Ambient temperature
• Storage
1)
acc. to EN 60068-2-1
-40 ... +70 °C (-40 ... +158 °F)
• Transport
1)
acc. to EN 60068-2-1
-40 ... +70 °C (-40 ... +158 °F)
• Operation acc. to EN 60068-2-2
-10 ... +40 °C (14 ... 104 °F) without derating
Environmental class/harmful chemical substances
Operation acc. to EN 60721-3-3
Class 3C2
Degree of pollution acc. to EN 61800-5-1
2
Certification for fail-safe versions
• According to IEC 61508
SIL 2
• According to EN ISO 13849-1
PL d and Category 3
Standards
Compliance with standards
UL, cUL, CE, C-Tick (RCM)
CE marking, according to
Low-Voltage Directive 2006/95/EC
EMC Directive
2)
• Frame sizes FSA to FSC with integrated line filter class A
Category C2
3)
according to EN 61800-3
Note:
The EMC product standard EN 61800-3 does not apply directly to a frequency
inverter but to a PDS (Power Drive System), which comprises the complete
circuitry, motor and cables in addition to the inverter. The frequency inverters
on their own do not generally require identification according to the EMC
Directive.
© Siemens AG 2016