SIEMENS
Description of options
SINAMICS GM150, SINAMICS SM150
Description of options
6/15
Siemens D 12 · 2012
6
■
Options
G20 to G24 and G34
Access to other bus systems
In the standard version the SINAMICS GM150 and
SINAMICS SM150 are equipped with a PROFIBUS interface
(slave). Additional interface modules are optionally available.
The SINAMICS Communication Boards CBC10 or CBE20
(option
G24
for SINAMICS GM150) and CBE30 (option
G34
for
SINAMICS SM150) are used to connect to the CANopen bus
system (option
G20
) or to PROFINET.
The "Anybus-X-Gateway" from the HMS Industrial Networks
company is used to connect to third-party Modbus Plus systems
(option
G21
), Modbus RTU (option
G22
) and DeviceNet (option
G23
).
When one of the options
G21 to G23
is ordered, the Anybus-
X-Gateway is installed when the equipment is delivered and is
connected to the CU320 Control Unit via a PROFIBUS cable.
The scope of supply includes a null modem cable to configure
the Anybus-X-Gateway. The Anybus-X-Gateway is preconfig-
ured to 20 bytes of I/O data. The data size can be changed via
the configuration interface from a PG/PC (standard PC tool
"Windows Hyper Terminal").
The "NetTool" supplied by HMS Industrial Networks must be
used to configure the PROFIBUS. This is not included in the
scope of supply.
Current information, documentation and tools for Anybus-
X-Gateway are available at
G25, G35
TeleService connection TS Adapter II analog modem,
ISDN modem
(SINAMICS GM150 in the IGBT version)
Using the TeleService connection, personnel in the central ser-
vice department can perform all operator functions and settings
with the STARTER software and provide support when service is
required.
An appropriate modem is required for the TeleService connec-
tion. This permits communications to be established between
the PROFIBUS inside the drive unit and a telephone cable to a
central service department. This modem, with PROFIBUS con-
nection, is integrated in a SIMATIC TS Adapter II, which is avail-
able in an analog (option
G25
) and an ISDN version (option
G35
). Under certain circumstances, an appropriate extension
cable is required to connect to the telephone line.
Further, a 24 V DC power supply is required locally for the
TS Adapter.
Note:
You will find additional information on TeleService in the following
Service&Support article on the Internet at
G30
PROFIBUS master
(SINAMICS GM150 with static excitation unit,
see Accessories, Chapter 7
)
SINAMICS GM150 converters can communicate as standard
only as PROFIBUS slaves. Therefore, in conjunction with a
SINAMICS GM150 converter, a SIMATIC S7 controller with
PROFIBUS master capability is used in the static excitation unit.
Option
Description
For SINAMICS GM150 (on request)
G20
CAN bus interface (CANopen)
G21
Modbus Plus interface
G22
Modbus RTU slave interface
G23
DeviceNet interface
G24
PROFINET interface (via CBE20)
For SINAMICS SM150in IGCT version (on request)
G34
PROFINET interface (via CBE30)
© Siemens AG 2012