SIEMENS
7
Options
01/28/2015
© Siemens AG 2015
16
SINAMICS GM150 SINAMICS SM150
Supplement for Catalog D 12 2012
7
Options
7.1
New options
7.1.1
G51 to G54
TM150 Terminal Module, temperature sensor evaluation units
(SINAMICS GM150; SINAMICS SM150 on request)
Overview
With options G51 to G54, one to four TM150 Terminal Modules can be ordered for
evaluation of several temperature sensors.
Table 2-1
Options G51 to G54
Order code
Option
G51
1 x TM150 temperature sensor evaluation unit
G52
2 x TM150 temperature sensor evaluation units
G53
3 x TM150 temperature sensor evaluation units
G54
4 x TM150 temperature sensor evaluation units
The TM150 Terminal Module is a DRIVE-CLiQ component for temperature
evaluation. The temperature is measured in a temperature range from –99 °C to
+250 °C for the following temperature sensors:
•
Pt100 (with monitoring for open-circuit and short-circuit)
•
Pt1000 (with monitoring for open-circuit and short-circuit)
•
KTY84 (with monitoring for open-circuit and short-circuit)
•
PTC (with short-circuit monitoring)
•
Bimetallic NC contact (without monitoring)
For the temperature sensor inputs, for each terminal block the evaluation can be
parameterized for 1x2-wire, 2x2-wire, 3-wire or 4-wire. There is no galvanic
isolation in the TM150.
The temperature channels of a TM150 can be subdivided into three groups and
evaluated together.
Note
With the introduction of the options G51 to G54 described above, options L80 to
L82 (thermistor protection relays) and L90 to L94 (Pt100 evaluation units) are not
available anymore.
This also involves catalog pages 2/11, 3/9, 4/9, 5/12, 6/5 f and 6/28 ff.