SIEMENS
SINAMICS GM150
Medium-Voltage Converter
SINAMICS GM150 in IGCT version
3/15
Siemens D 12 · 2012
3
■
Technical specifications
Note:
The values specified under storage and transport apply to
suitably packed converters.
Operation of induction motors
Operation of separately excited
synchronous motors
Without speed encoder
With speed encoder
With speed encoder
Control properties
Operating range
• Lower limit of speed control range
(% of rated motor speed)
5 %
0 %
0 %
• Max. permissible output frequency
250 Hz
250 Hz
90 Hz
• Field-shunting range
1:3
1:3
1:4
Stationary operation
• Speed accuracy
(% of rated motor speed)
± 0.2 %
(from 5 % of rated speed)
± 0.01 %
± 0.01 %
• Torque accuracy
(% of rated torque)
± 5 %
(from 5 % of rated speed)
± 5 %
± 2 %
Dynamic operation
• Torque rise time
5 ms
5 ms
5 ms
Storage
Transport
Operation
Climatic ambient conditions
Ambient temperature
-25 ... +70 °C
-25 ... +70 °C
5 ... 45 °C
Relative air humidity
5 ... 95 %
(only slight condensation permit-
ted; converter must be completely
dry before commissioning)
5 ... 75 %
5 ... 85 %
(condensation not permissible)
Other climatic conditions
in accordance with Class
1K3 acc. to EN 6072131
(IEC 6072131)
(formation of ice not permissible)
2K2 acc. to EN 6072132
(IEC 6072132)
3K3 acc. to EN 6072133
(IEC 6072133)
Degree of pollution
2 without conductive pollution
according to EN 50178/VDE 0160
(IEC 62103)
2 without conductive pollution
according to EN 50178/VDE 0160
(IEC 62103)
2 without conductive pollution
according to EN 50178/VDE 0160
(IEC 62103)
Mechanical ambient conditions
Dynamic stress
• Deflection
1.5 mm at 2 ... 9 Hz
3.5 mm at 2 ... 9 Hz
0.3 mm at 2 ... 9 Hz
• Acceleration
5 m/s
2
at 9 ... 200 Hz
10 m/s
2
at 9 ... 200 Hz
15 m/s
2
at 200 ... 500 Hz
1 m/s
2
at 9 ... 200 Hz
Other mechanical conditions in
accordance with Class
(increased strength for marine duty)
1M2 acc. to EN 6072131
(IEC 60721-3-1)
2M2 acc. to EN 6072132
(IEC 60721-3-2)
3M1 acc. to EN 6072133
(IEC 60721-3-3)
Other ambient conditions
Biological ambient conditions
in accordance with Class
1B1 acc. to EN 6072131
(IEC 6072131)
2B1 acc. to EN 6072132
(IEC 6072132)
3B2 acc. to EN 6072133
(IEC 6072133)
(without damaging flora)
Chemically active substances
in accordance with Class
1C1 acc. to EN 6072131
(IEC 6072131)
2C1 acc. to EN 6072132
(IEC 6072132)
3C2 acc. to EN 6072133
(IEC 6072133)
(no salt mist)
Mechanically active substances
in accordance with Class
1S1 acc. to EN 6072131
(IEC 6072131)
2S1 acc. to EN 6072132
(IEC 6072132)
3S1 acc. to EN 6072133
(IEC 6072133)
© Siemens AG 2012