SIEMENS
SINAMICS G180
Option descriptions
Engineer To Order – ETO
4/34
Siemens D 18.1 · 2014
4
■
Options
Engineering
In addition to the standard options, for SINAMICS G180 convert-
ers, the option "Engineer To Order" (ETO) can also be ordered.
These ETO orders are then specially defined and engineered to
suit customer requirements.
They cannot be ordered using the electronic ordering tools,
but only on request through a Siemens contact:
X30 mechanical
e.g. cabinet dimensions with special height =1800 mm
X40 parameterization
e.g. parameterization of additional monitoring functions:
overspeed, underspeed
X50 electrical (output, controller)
e.g. special monitoring devices, safety-related standstill
monitoring of motor speed
X51 extended overvoltage range
•
For compact units:
- 400 V supply with 400 V compact units:
These converters can be operated up to 500 V +10 % as
standard. These converters are therefore suitable as
standard for ZLU use. If the overvoltage has been agreed as
1.4 ×
U
r
, the parameter UD-MAXFAKT simply has to be set to
140 %.
- 500 V supply with 500 V compact units:
The 690 V devices must be selected for this purpose.
The power rating must normally then be increased to the
next level. The parameter U mains nom. must be set to 500
V.
UD-MAXFAKT must be set to the agreed value
(125 to 140 %).
- 690 V supply with 690 V compact units:
These devices can be operated for a short time at an
overvoltage of 1.3 ×
U
r
.
•
For cabinet units:
- 400 V supply with cabinet units:
The 500 V devices must be selected for this purpose.
The power rating must normally then be increased to the
next level. The parameter U mains nom. must be set to 400 V.
UD-MAXFAKT must be set to the agreed value
(125 to 140 %).
- 500 V supply with 500 V cabinet units:
The 690 V devices must be selected for this purpose.
The power rating must normally then be increased to the
next level. The parameter U mains nom. must be set to 500
V.
UD-MAXFAKT must be set to the agreed value
(125 to 140 %).
- 690 V supply with 690 V cabinet units up to 710 kW:
These devices can be operated for a short time at an
overvoltage of 1.3 ×
U
r
.
- 690 V supply with 690 V cabinet units from 800 to 1000 kW:
This converter output is achieved by interconnecting
converters with lower outputs (multi-system converter).
The devices can then be operated for a short time at an
overvoltage of 1.3 ×
U
r
.
More detailed information can be obtained from your Siemens
sales partner.
X60 test bay converter
e.g. engineering of a motor test bay
X70 special tests
e.g. special tests, such as vibration
X80 special documentation
e.g. documentation in a special CAD system
X90 special version
When the scope cannot be clearly assigned to one of the already
listed options.
© Siemens AG 2014