SIEMENS
SINAMICS G180
Option descriptions
Standard options
4/28
Siemens D 18.1 · 2014
4
■
Options
(continued)
M20 and N50
Wiring options
M20
Minimum cross-section of the internal cabinet wiring
1.5 mm
2
With option
M20
the internal wiring of the controller in the con-
verter is implemented using a minimum conductor cross-section
of 1.5 mm
2
. Individual electronics leads, such as flat ribbon
cables are excluded from this.
N50
Use of halogen-free cables inside cabinet
With option
N50
halogen-free cables are used. Individual
electronics leads, such as flat ribbon cables are excluded
from this.
Q80, Q81, Q82, Q83, Q84 and Q85
Extension of the liability for defects
Conditions for an extension of the liability for defects:
•
For all extension periods of liability for defects, for new and
subsequent orders, the final destination of the product must
be known. The EUNA process is available to obtain this
information at
/euna
,
which must be performed by your local Siemens contact
person.
•
For all 4 and 5
year extension periods of the liability for defects
(Q84
,
Q85
), this is only possible in conjunction with a corre-
sponding maintenance contract with regular inspections. This
maintenance contract must be signed and concluded with the
responsible service department. This must be documented
using the EUNA procedure at
/euna
,
which must be performed by your local Siemens contact
person.
•
The general storage conditions described in the operating
instructions must be adhered to, especially the specifications
for long-term storage.
•
Commissioning must be performed by appropriately qualified
personnel. When making liability for defect claims, under
certain circumstances, it may be necessary to submit the
commissioning report to the department making the decision.
•
Periodic maintenance must be performed in accordance with
the specifications of the operating instructions. When making
liability for defect claims, under certain circumstances, it may
be necessary to submit the corresponding maintenance
documentation and history.
•
The operating conditions correspond to the specifications in
the operating instructions, the installation instructions or
specific conditions laid down in the contract.
•
The extended liability for defects excludes wearing parts such
as fans or filters. This does not apply if it can be clearly proven
that the failure is a premature one.
•
Otherwise, the general conditions regarding liability for
defects apply as agreed in the delivery contract.
Option
Description
Q80
Extension of the liability for defects by 12 months as of
commissioning date or by 24 months as of delivery date
Q81
Extension of the liability for defects by 18 months as of
commissioning date or by 30 months as of delivery date
Q82
Extension of the liability for defects by 24 months as of
commissioning date or by 36 months as of delivery date
Q83
Extension of the liability for defects by 30 months as of
commissioning date or by 42 months as of delivery date
Q84
Extension of the liability for defects by 36 months as of
commissioning date or by 48 months as of delivery date
Q85
Extension of the liability for defects by 48 months as of
commissioning date or by 60 months as of delivery date
© Siemens AG 2014