SIEMENS
SINAMICS G180
Option descriptions
Standard options
4/24
Siemens D 18.1 · 2014
4
■
Options
(continued)
M17
Door opening angle 180°
M17
Door opening angle 180°
With option
M17
all standard hinges are replaced with 180°
hinges. The converter cabinet door can therefore normally
open 180°, but the opening angle may be reduced by compo-
nents installed in the control cabinet door.
M19
Window in door for viewing internal display
M19
Example of window in door for viewing internal display
With this option, an inspection window is installed in the control
cabinet door. The internal converter display can be read through
this.
M24
Partitions between compact units for cabinet systems
M24
Partitions between the compact units (example shown)
Partitions can be used between compact units in cabinet
systems to implement clear separation of the converter
with the associated controller.
M28
Door hinge on left
M28
Door hinge on left
The SINAMICS G180 converter is supplied as standard up to a
cabinet width of 800 mm with the door hinged on the right
(hinges on right). With this option, the doors are hinged on the
left (hinges on left).
Note:
This option is not possible in the case of double doors
(cabinet width 1000 mm or 1200 mm).
© Siemens AG 2014