SIEMENS
SINAMICS G180
Option descriptions
Standard options
4/23
Siemens D 18.1 · 2014
4
■
Options
(continued)
Note:
Please specify alarm and trip limits or which temperatures
should be monitored in the order.
M05, M06, M07, M13, M17, M19, M24, M28, M34, M38, M39,
M40, M59, M78, Y09 and Y19
Cabinet options
M05
Control cabinet base, welded and suitable for use with
transport rollers in RAL 7022, height 200 mm
M05
Control cabinet base, welded
The control cabinet base allows larger bending radii for cables
(cable inlet from below) and enables them to be routed within the
control cabinet base.
The control cabinet base is welded and suitable for use with
transport rollers. The standard color is RAL 7022; a special paint
finish for the control cabinet base is not possible. It is delivered
completely assembled with the cabinet.
Base element 200 mm painted (RAL 7022).
Note:
The control cabinet base is supplied fully assembled with the
converter cabinet.
M06
Control cabinet base RAL 7022/9005 as standard,
height 100 mm
M06
Control cabinet base
The control cabinet base allows larger bending radii for cables
(cable inlet from below) and enables them to be routed within the
control cabinet base.
The standard color is RAL 7022/9005; a special paint finish for
the control cabinet base is not possible. The height is 100 mm.
Note:
For transport reasons, the control cabinet bases are delivered
separately or packed alongside the cabinet and must be
mounted on site before the cabinet is assembled.
M07
Control cabinet base RAL 7022/9005 as standard,
height 200 mm
For image, see option
M06
Control cabinet base.
The control cabinet base allows larger bending radii for cables
(cable inlet from below) and enables them to be routed within the
control cabinet base.
The standard color is RAL 7022/9005; a special paint finish for
the control cabinet base is not possible. The height is 200 mm.
Note:
For transport reasons, the control cabinet bases are delivered
separately or packed alongside the cabinet and must be
mounted on site before the cabinet is assembled.
M13
Cable entry from the top: power cable
With option
M13
the cables for mains connection will enter the
control cabinet from the top.
The width of the cabinet may increase depending on the con-
verter type and equipment. Please contact the factory regarding
the exact dimensions of the converter with this option.
M34
Cable entry from the top: control cables
With option
M34
the cables for the control cables will enter the
cabinet from the top.
The width of the cabinet may increase depending on the con-
verter type and equipment. Please contact the factory regarding
the exact dimensions of the converter with this option.
M78
Cable entry from the top: motor cables
With option
M78
the motor cables will enter the control cabinet
from the top.
The width of the cabinet may increase depending on the con-
verter type and equipment. Please contact the factory regarding
the exact dimensions of the converter with this option.
© Siemens AG 2014