SIEMENS
3/2
Siemens D 11 · 2015
3
SINAMICS G130
Drive converter chassis units
75 kW to 800 kW
■
Overview
SINAMICS G130 converter built-in units, frame sizes FX and HX
The SINAMICS G130 is a converter that can be combined very
flexibly with the associated system components and installed
into customer-specific control cabinets or directly into machines.
SINAMICS G130 converter built-in units are available for the
following voltages and power ratings:
A wide range of add-on electrical components allow the drive
system to be optimized for specific requirements. Configuration
and commissioning are greatly simplified by predefined inter-
faces.
The control accuracy of the sensorless vector control is suitable
for most applications, which means that an additional actual
speed value encoder is not required.
However, encoder evaluation units are available for the
SINAMICS G130 converters so that they can address applica-
tions that require an encoder for plant-specific reasons.
Communication between the Control Unit, the Power Module
and other active SINAMICS components is performed via
DRIVE-CLiQ, the drive's internal interface. The DRIVE-CLiQ con-
nections, which are available as pre-assembled cables of differ-
ent lengths, allow a complete converter system to be put
together quickly.
For communication with the process control system, with the
CU320-2 Control Unit either a PROFIBUS or a PROFINET inter-
face is available as standard. The interface can also be ex-
panded with digital and analog inputs and outputs. The TM31
Terminal Module and TB30 Terminal Board are provided for this
purpose. Additional expansion cards can also be installed to
allow communication via CANopen or EtherNet/IP.
Line voltage
Power
380 ... 480 V 3 AC
110 ... 560 kW
500 ... 600 V 3 AC
110 ... 560 kW
660 ... 690 V 3 AC
75 ... 800 kW
© Siemens AG 2015