SIEMENS
3/69
Siemens D 11 · 2015
3
SINAMICS G130
Drive converter chassis units
Supplementary system components > TM150 Terminal Module
■
Overview
TM150 Terminal Module
The TM150 Terminal Module is a DRIVE-CLiQ component for
temperature evaluation. The temperature is measured in a tem-
perature range from -99 °C to +250 °C (-146.2 °F to 482 °F) for
the following temperature sensors:
•
Pt100 (with monitoring for open-circuit and short-circuit)
•
Pt1000 (with monitoring for open-circuit and short-circuit)
•
KTY84 (with monitoring for open-circuit and short-circuit)
•
PTC (with short-circuit monitoring)
•
Bimetallic NC contact (without monitoring)
For the temperature sensor inputs, for each terminal block the
evaluation can be parameterized for 1×2-wire, 2×2-wire, 3-wire
or 4-wire. There is no galvanic isolation in the TM150 Terminal
Module.
The temperature channels can be subdivided into 3 groups and
evaluated together.
■
Design
The following are located on the TM150 Terminal Module:
•
6 terminal blocks for max. 12 temperature sensor inputs
•
2 DRIVE-CLiQ sockets
•
1 connection for the electronics power supply via the 24 V DC
supply connector
•
1 PE/protective conductor connection
The status of the TM150 Terminal Module is indicated via a multi-
color LED.
The TM150 Terminal Module can be snapped onto a TH 35 stan-
dard mounting rail in accordance with EN 60715 (IEC 60715).
■
Selection and ordering data
For the SINAMICS G150, SINAMICS S150 and SINAMICS S120
Cabinet Modules, the TM150 Terminal Module can be ordered
as an option by specifying order code
G51
or
G51 ... G54
.
■
Technical specifications
Description
Article No.
TM150 Terminal Module
Without DRIVE-CLiQ cable
6SL3055-0AA00-3LA0
Accessories for re-ordering
SINAMICS/SINUMERIK/SIMOTION
dust-proof blanking plugs
(50 units)
For DRIVE-CLiQ port
6SL3066-4CA00-0AA0
TM150 Terminal Module
6SL3055-0AA00-3LA0
Power requirement, max.
at 24 V DC
0.5 A
• Conductor cross section, max.
2.5 mm
2
• Fuse protection, max.
20 A
Temperature sensor inputs
The inputs can be parameterized individu-
ally for the evaluation of sensors
• Conductor cross section, max.
1.5 mm
2
• Measuring current per sensor, approx.
0.8 mA
Power loss
1.6 W
PE connection
M4 screw
Dimensions
• Width
30 mm (1.18 in)
• Height
150 mm (5.91 in)
• Depth
119 mm (4.69 in)
Weight, approx.
0.41 kg (0.90 lb)
© Siemens AG 2015