SIEMENS
3/15
Siemens D 35 · 2017
3
System configuration
SINAMICS G120P and SINAMICS G120P Cabinet pump, fan, compressor converters
SINAMICS G120P and SINAMICS G120P Cabinet pump, fan, compressor converters
■
Accessories
Optional accessories
Shield connection kit 1 for CU230P-2 HVAC/DP Control Units
Shield connection kit 1 offers optimum shield connection and
strain relief for all signal and communication cables. It includes
a matching shield bonding plate and all of the necessary con-
necting and retaining elements for mounting.
Shield connection kit 3 for CU230P-2 PN, CU240E-2 PN and
CU240E-2 PN-F Control Units
Shield connection kit 3 offers optimum shield connection and
strain relief for all signal and communication cables. It includes
a matching shield bonding plate and all of the necessary con-
necting and retaining elements for mounting.
SINAMICS memory card (SD card)
The parameter settings for an inverter can be stored on the
SINAMICS SD memory card. The SINAMICS SD card can be
used to pre-parameterize inverters and to clone complete in-
verter data sets. When service is required, e.g. after the inverter
has been replaced and the data have been downloaded from
the memory card the drive system is immediately ready for use
again. The associated slot is located on the top of the Control
Unit.
PC inverter connection kit 2
For controlling and commissioning the inverter directly from
a PC, if the STARTER commissioning tool has been installed on
the PC.
Installation kit for line-side cable connection, left, for PM330
Power Modules
This installation kit allows supply cables to be brought in from the
left-hand side of frame size GX and HX PM330 Power Modules.
It is then possible to install the Power Module in the cabinet with-
out any clearance at the top.
Spare parts
Mounting set for PM230 and PM240P-2 Power Modules
Depending on the frame size, different mounting sets are avail-
able for PM230 and PM240P-2 Power Modules.
Fan units for PM230 Power Modules
The PM230 Power Module is equipped with an internal and an
external fan unit. Both of these can be replaced if necessary.
Replacement fans
The fans for PM240P-2 and PM330 Power Modules are available
to order as replacement fans.
© Siemens AG 2017