SIEMENS
4/96
Siemens D 35 · 2017
4
SINAMICS G120P built-in and wall-mounted units
Supplementary system components
Memory cards
■
Overview
SINAMICS memory card (SD card)
The parameter settings for an inverter can be stored on the
SINAMICS SD memory card. When service is required, e.g. after
the inverter has been replaced and the data have been down-
loaded from the memory card the drive system is immediately
ready for use again.
•
Parameter settings can be written from the memory card to the
inverter or saved from the inverter to the memory card.
•
Up to 100 parameter sets can be stored.
•
The memory card supports series commissioning without the
use of an operator panel such as the IOP, BOP-2 or the
STARTER and SINAMICS Startdrive commissioning tools.
Note:
The memory card is not required for operation and does not
have to remain inserted.
■
Selection and ordering data
For more information about firmware V4.7:
For more information about firmware V4.7 SP6:
■
Overview
PC inverter connection kit 2
For controlling and commissioning an inverter directly from a PC,
if the STARTER commissioning tool
1)
has been installed on the
PC. With this, the inverter can be
•
parameterized (commissioning, optimization)
•
monitored (diagnostics)
•
controlled (master control via the STARTER commissioning
tool
1)
for test purposes)
A USB cable (3 m/9.84 ft) is included in the scope of delivery.
The PC inverter connection kit 2 is suitable for the following
SINAMICS G120 Control Units:
• CU230P-2 HVAC
• CU230P-2 DP
• CU230P-2 PN
• CU240E-2
• CU240E-2 DP
• CU240E-2 PN
• CU240E-2 F
• CU240E-2 DP-F
• CU240E-2 PN-F
• CU250S-2
■
Selection and ordering data
Description
Article No.
SINAMICS SD card
512 MB
6SL3054-4AG00-2AA0
Optional firmware memory cards for CU230P-2 Control Units
SINAMICS SD card
512 MB + firmware V4.7
(Multicard V4.7)
6SL3054-7EH00-2BA0
SINAMICS SD card
512 MB + firmware V4.7 SP6
(Multicard V4.7 SP6)
6SL3054-7TD00-2BA0
PC inverter connection kit 2
Description
Article No.
PC inverter connection kit 2
for CU230P-2, CU240E-2 and CU250S-2
Control Units
including USB cable
(length 3 m/9.84 ft)
6SL3255-0AA00-2CA0
1)
The STARTER commissioning tool is also available on the Internet at
© Siemens AG 2017