SIEMENS
SINAMICS DCM
Accessories and supplementary components
SMC30 Sensor Module Cabinet-Mounted
4/5
Siemens D 23.1 · 2014
4
■
Selection and ordering data
(continued)
DRIVE-CLiQ cables
■
Overview
The number of available digital inputs and outputs within a drive
system can be expanded with the TM15 Terminal Module.
■
Design
The following are located on the TM15 Terminal Module:
•
24 bidirectional digital inputs/outputs (isolation in 3 groups
with 8 channels each)
•
24 green status LEDs for indicating the logical signal status of
the relevant terminal
•
2 DRIVE-CLiQ sockets
•
1 connection for the electronics power supply via the 24 V DC
power supply connector
•
1 PE/protective conductor connection
The TM15 Terminal Module can be snapped onto a TH 35
mounting rail in accordance with EN 60715 (IEC 60715).
The signal cable shield can be connected to the TM15 Terminal
Module via a shield connection terminal, e.g. Phoenix Contact
type SK8 or Weidmüller type KLBÜ CO 1. The shield connection
terminal must not be used for strain relief.
The status of the TM15 Terminal Module is indicated via a
multi-color LED.
Description
Length
Article No.
m
Pre-fabricated
DRIVE-CLiQ cable
Degree of protection of
connector IP20/IP20
0.11
6SL3060-4AB00-0AA0
0.16
6SL3060-4AD00-0AA0
0.21
6SL3060-4AF00-0AA0
0.26
6SL3060-4AH00-0AA0
0.36
6SL3060-4AM00-0AA0
0.60
6SL3060-4AU00-0AA0
0.95
6SL3060-4AA10-0AA0
1.20
6SL3060-4AW00-0AA0
1.45
6SL3060-4AF10-0AA0
2.80
6SL3060-4AJ20-0AA0
5.00
6SL3060-4AA50-0AA0
TM15 Terminal Module
© Siemens AG 2014