SIEMENS
3/23
Siemens ST PCS 7 · 2017 (Preliminary edition)
3
■
Overview
(continued)
Industrial Workstation/IPC
SIMATIC Rack PC
IPC647D
Expansion options and interfaces
•
2 × 10/100/1000 Mbit/s Ethernet RJ45 port integrated
onboard
•
Alternative bus modules with up to 4 slots for PCI/PCI-Express
expansion modules (all for modules up to 312 mm long)
- 2 × PCIe x16 (8 lanes) and 2 × PCI or
- 1 × PCIe x16 (8 lanes) and 3 × PCIe x16 (4 lanes)
•
Total of 4 USB 3.0 ports
- 2 × on the rear of the device
- 1 × on the front
- 1 × internal, e.g. for software license dongle ASIA
•
Total of 3 USB 2.0 ports
- 2 × on the rear of the device
- 1 × on the front
•
Serial COM interface (1 × COM1)
•
Further interfaces at the rear of the device:
- 2 × PS/2 for mouse and keyboard
- Audio (1 × Line Out, 1 × Micro In)
•
Connections for SATA/SAS drives, occupied in accordance
with preconfigured features:
- Up to 2 HDD/SSD in slimline removable drive bay (at the
front) or alternatively
- Up to 2 HDD in the vibration-damped drive cage (internal)
- 1 slimline DVD burner (at the front) or alternatively
- 1 SSD in the DVD drive slot
High system availability and safety
•
High-quality components with high MTBF values
•
RAID1 configurations for data mirroring on 2
drives (also in hot
swap removable drive bay for replacement of a hard disk
during operation):
- 2 SATA HDD or 2 SATA SSD on the onboard RAID controller
- 2 SAS HDD on the hardware RAID controller
•
Faulty hard disk in a RAID network can be quickly identified
via the HDD alarm LED
•
Redundant power supply 100 to 240 V AC as design variation
•
Efficient self-diagnostics via LEDs on front for power,
watchdog (ready/fault signal), hard disk activity, and status of
Ethernet, RAID, fans and temperature
•
Closing of the front door prevents:
-
Access to drives, removable memory media, USB interface,
operator controls (reset, power), front fan and filter mat
- Opening of the enclosure cover
Integration in SIMATIC PCS 7 system diagnostics
•
Can be integrated into the system diagnostics with the
SIMATIC PCS
7 Maintenance Station by means of the SIMATIC
IPC DiagMonitor diagnostics software for monitoring the
program execution (watchdog), temperature, fan speed, hard
disk status and system failure
Practical and service-friendly design for industrial use
•
High electromagnetic compatibility (EMC)
•
Degree of protection on the front: IP41 (with door closed), at
rear: IP20
•
Dust protection by means of pressurized ventilation with
regulated front fan and dust filter
•
Front fan and dust filter can be replaced without tools
•
Special hard disk holders and card retainers for protection
against vibration and shock
•
Fast replacement of hard disks by means of hot-swap frame
(configuration option)
•
Simple cabinet assembly possible using telescopic rails
High investment protection
•
System-tested with SIMATIC PCS 7
•
Marketing period 5 years, supply with replacement parts/
repairs over further 5 years
•
Support for legacy interfaces (PS/2, COM)
•
Certifications for worldwide marketing (cULus)
•
Worldwide service and support
© Siemens AG 2017