SIEMENS
ROBICON Perfect Harmony
Liquid-cooled drives
4
4/9
Siemens D 16.2
– 2012
Options
Description of Options
Note: For more information on Liquid-Liquid heat
exchangers, please contact your local Siemens sales
representative for any questions or inquiries
Example of liquid-air heat exchanger
Note: For more information on Liquid-Air heat exchangers,
please contact your local Siemens sales representative for
any questions or inquiries.
W71
Deionized water supplied by Siemens
With option
W71
, Siemens will provide the required amount
of deionized water for the inner closed loop cooling system
.
W72, W73
Coolant glycol
For further details, please contact the factory or your local
Siemens sales representative.
Option
Description
W72
Propylene glycol supplied by Siemens
With option W72, Siemens will provide the required
amount of propylene glycol for the inner closed loop
cooling system.
W73
Ethylene glycol supplied by Siemens
With option W73, Siemens will provide the required
amount of ethylene glycol for the inner closed loop
cooling system.
Y05
Customer-specific nameplate
As standard the nameplate shows the rated data of the drive
under nominal conditions.
If data on the nameplate should be adapted to special
ambient conditions (temperature, altitude) or should reflect
special load conditions (e.g. derating because of operation
at low frequency), the option
Y05
must be selected.
Information to be supplied:
• Altitude
• Coolant temperature
• Rated voltage
• Rated current
• Rated power
Y09
Paint finish other than standard
As standard the drives are supplied with ANSI 61 paint
finish. A special color must be specified in plain text when
ordering.
Y10
Circuit diagrams with customer-specific description field
The circuit diagrams are given customer-specific headers.
The data for the header must be specified in plain text (up
to three lines of 45 characters per line).
Y37
Customer specified touchscreen
A customer specified touchscreen will be provided on
the door of the drive. Option
Y37
includes option
N85
(Operator panel located internal to cabinet).
For details please contact the factory or your local Siemens
sales representative.
Y38
Customer specified equipment on right door
With option Y38, customer specified equipment will be
mounted on the right door.