SIEMENS
9/39
Siemens IC 10 · 2017
Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
General data
9
■
Benefits
Advantages through energy efficiency
Overview of the energy management process
We offer you a unique portfolio for industrial energy manage-
ment, using an energy management system that helps to opti-
mally define your energy needs. We split up our industrial
energy management into three phases – identify, evaluate, and
realize – and we support you with the appropriate hardware and
software solutions in every process phase.
The innovative SIRIUS industrial controls products can also
make a major contribution to the energy efficiency of a plant
(see www.siemens.com/sirius/energysaving)
.
M200D motor starters contribute to energy efficiency as follows:
•
Energy management:
Provision of energy data (current) by bus to higher-level
systems using PROFIenergy
(see "PROFINET M200D Motor
Starters", page 9/47)
•
Elimination of energy consumption in dead times through
disconnection using PROFIenergy
(see "PROFINET M200D
Motor Starters", page 9/47)
•
Current management:
With the electronic soft starter, avoidance of current peaks,
thus reducing the load on the grid and the mechanical system
•
Depending on technology, lower intrinsic power loss than
speed-controlled drive systems
•
Solid-state modules equipped with soft start technology with
bypass contactor, resulting in lower power losses than with
conventional soft starters after start up
Product advantages
M200D motor starters provide the following advantages for
customers:
•
High plant availability through plug-in capability of the main
circuit, communication and I/Os – relevant for installing and
replacing devices
•
Cabinet-free construction and near-motor installation thanks
to the high degree of protection IP65
•
The motor starters record the actual current flow for the
parameterizable electronic motor overload protection.
Reliable messages concerning the overshooting or under-
shooting of setpoint values for comprehensive motor protec-
tion. All motor protection functions can be defined by simple
parameterization
•
Low stock levels and low order costs thanks to a wide setting
range for the electronic motor protection of 1:10 (only two
device versions up to 5.5 kW)
•
The integrated wide range for the current enables a single
device to cover numerous standard motors of different sizes
•
Comprehensive offering of accessories,
including ready-assembled cables
•
The M200D motor starters can be installed with a few manual
steps. The integrated plug-in technology enables far lower
wiring outlay: preassembled cables can be plugged directly
onto the motor starter module
•
Easy and user-friendly installation because all versions have
the same enclosure dimensions
•
Fast and user-friendly commissioning using optional manual
local operation
•
Increase of process speed through integrated functions such
as "Quick Stop" and "Disable Quick Stop", e.g. at points and
crossings
•
Optional manual local control with momentary-contact and
latching operation for easier start up and easier servicing
■
Application
The high degree of protection IP65 makes the M200D motor
starters suitable in particular for use on extensive conveying
systems such as are found in mail sorting centers, airports,
automotive factories and the packing industry.
For simple drive tasks, particularly in conveyor applications, the
new SINAMICS G110D frequency inverter series with a perfor-
mance range from 0.75 kW to 7.5 kW and degree of protection
IP65 is the ideal partner for the M200D motor starters.
SINAMICS G110D allow for stepless speed control of three-
phase asynchronous motors and comply with the requirements
for materials handling applications with frequency control
(for further information
see catalog D 31
).
For simple operating mechanism tasks in conveyor applications
in which a frequency inverter integrated into the motor is
required, the SINAMICS G110M frequency inverter with a perfor-
mance range from 0.37 kW to 4 kW and degree of protection
IP65/66 is the ideal partner. The SINAMICS G110M is available
individually as a frequency inverter for self-assembly and pre-
mounted on SIMOGEAR geared motors, and with its conveyor-
specific functions it satisfies the requirements of conveyor tech-
nology applications (for further information,
see Catalog D 31
).
Use of SIRIUS M200D motor starters in conjunction with
IE3/IE4 motors
Note:
For the use of SIRIUS M200D motor starters in conjunction with
highly energy-efficient IE3/IE4 motors, please observe the infor-
mation on dimensioning and configuring;
see "Application
Manual for SIRIUS Controls with IE3/IE4 Motors",
.
For more information
see Preface, page 7
.
IC01_00244
© Siemens AG 2016