SIEMENS
10/16
Siemens IC 10 · 2017
* You can order this quantity or a multiple thereof.
Illustrations are approximate
SIMOCODE 3UF Motor Management and Control Devices
SIMOCODE pro 3UF7 Motor Management and Control Devices
Expansion modules
10
■
Selection and ordering data
1)
Possible with pro V basic unit from product version E10 or pro V PN basic
unit from product version E04, operator panels with display from product
version E07.
Version
SD
Screw terminals
PU
(UNIT,
SET, M)
PS*
PG
d
Article No.
Price
per PU
Expansion modules for SIMOCODE pro V
With SIMOCODE pro V, it is possible to expand the type
and number of inputs and outputs in steps. Each expansion
module has two system interfaces on the front. Through the
one system interface the expansion module is connected to
the system interface of the SIMOCODE pro V using a con-
nection cable; through the second system interface, further
expansion modules or the operator panel can be con-
nected. The power supply for the expansion modules is
provided by the connection cable through the
basic unit.
Note:
Please order connection cable separately,
see page 10/19
.
3UF7300-1AU00-0
Digital modules
Up to two digital modules can be used to add additional
binary inputs and relay outputs to the basic unit. The input
circuits of the digital modules are supplied from an external
power supply.
4 binary inputs and 2 relay outputs,
up to 2 digital modules can be connected
Relay outputs
Input voltage
Monostable
24 V DC
}
3UF7300-1AB00-0
1
1 unit
42J
110 ... 240 V AC/DC
}
3UF7300-1AU00-0
1
1 unit
42J
Bistable
24 V DC
}
3UF7310-1AB00-0
1
1 unit
42J
110 ... 240 V AC/DC
}
3UF7310-1AU00-0
1
1 unit
42J
3UF7400-1AA00-0
Analog module
By means of the analog module, the basic unit can be
optionally expanded with analog inputs and outputs
(0/4 ... 20 mA).
2 inputs (passive) for input and 1 output for output
of 0/4 ... 20 mA signals, max. 1 analog module can be
connected per pro V basic unit and max. 2 analog
modules per pro V PN basic unit
}
3UF7400-1AA00-0
1
1 unit
42J
3UF7510-1AA00-0
Ground-fault modules
1)
Ground-fault monitoring using 3UL23 residual-current
transformers and ground-fault modules is used in cases
where precise detection of the ground-fault current is
required or power systems with high impedance are
grounded.
With the ground-fault module, it is possible to determine
the precise fault current as a measured value, and to
define freely selectable warning and trip limits in a wide
range from 30 mA ... 40 A.
1 input for connecting a 3UL23 residual-current trans-
former, up to 1 ground-fault module can be connected
Note:
For corresponding residual-current transformers,
see page 10/95
.
}
3UF7510-1AA00-0
1
1 unit
42J
3UF7700-1AA00-0
Temperature modules
Independently of the thermistor motor protection of the
basic units, up to 3 analog temperature sensors can be
evaluated using a temperature module.
Sensor types: PT100/PT1000, KTY83/KTY84 or NTC
3 inputs for connecting up to 3 analog temperature
sensors, up to 1 temperature module can be
connected per pro V basic unit and up to 2 temperature
modules per pro V PN basic unit
}
3UF7700-1AA00-0
1
1 unit
42J
© Siemens AG 2016