SIEMENS
3/294
Siemens IK PI · 2015
PROFIBUS
SIMOCODE 3UF Motor Management and Control Devices
SIMOCODE pro
Accessories
3
■
Selection and ordering data
(continued)
1)
Possible with pro V basic unit, product version E09 (11/2012) and higher,
pro S basic unit or pro V PN basic unit.
Version
Article No.
Accessories for motor control center
With the draw-out technology often used in motor control centers it is possible
to integrate a SIMOCODE pro initialization module in the switchboard
on a permanent basis.
Feeder-related parameter and address data can then be permanently assigned
to this feeder.
3UF7902-0AA00-0
Initialization module
1)
For automatic parameterization of SIMOCODE pro S, SIMOCODE pro V and SIMOCODE
pro V PROFINET, for fixed-mounted installation in switchboards
3UF7902-0AA00-0
Y connection cable
1)
For use in conjunction with the initialization module;
connects the basic unit, current measuring module or current/voltage measuring module,
and initialization module
System interface length
Open cable end
0.1 m
1.0 m
3UF7931-0CA00-0
0.5 m
1.0 m
3UF7932-0CA00-0
1.0 m
1.0 m
3UF7937-0CA00-0
Bus connection terminals
3UF7960-0AA00-0
Bus connection terminal
For shield support and strain relief of the PROFIBUS cable
on a SIMOCODE pro S
3UF7960-0AA00-0
Door adapters
3UF7920-0AA00-0
Door adapters
For external connection of the system interface, e.g. outside a control cabinet
3UF7920-0AA00-0
Adapters for operator panel
3UF7922-0AA00-0
Adapters for operator panel
The adapter enables the smaller 3UF7200 operator panel from SIMOCODE pro to be
used in a front panel cutout in which previously, e.g. after a change of system, a larger
3UF52 operator panel from SIMOCODE-DP had been used, degree of protection IP54
3UF7922-0AA00-0
Labeling strips
3UF7925-0AA02-0
Labeling strips
• For pushbuttons of the 3UF720 operator panel
3UF7925-0AA00-0
• For pushbuttons of the 3UF721 operator panel with display
3UF7925-0AA01-0
• For LEDs of the 3UF720 operator panel
3UF7925-0AA02-0
Push-in lugs
3RV2928-0B
Push-in lugs for screw fixing
e.g. on mounting plate, 2 units required per device
• Can be used for 3UF71.0, 3UF71.1 and 3UF71.2
3RV2928-0B
• Can be used for 3UF700, 3UF701, 3UF73, 3UF74, 3UF75 and 3UF77
3RP1903
• Can be used for 3UF7020, 3UF7600
3ZY1311-0AA00
© Siemens AG 2014