SIEMENS
3/286
Siemens IK PI · 2015
PROFIBUS
SIMOCODE 3UF Motor Management and Control Devices
SIMOCODE pro
General data
3
■
Application
SIMOCODE pro is often used for automated processes where
plant downtimes are very expensive (e.g. steel or cement indus-
try) and where it is important to prevent plant downtimes through
detailed operating, service and diagnostics data or to localize
the fault very quickly in the event of a fault.
SIMOCODE pro is modular and space-saving and suited espe-
cially for operation in motor control centers (MCCs) in the pro-
cess industry and for power plant technology.
Applications
Protection and control of motors in hazardous areas for types of
protection EEx e/d according to ATEX guideline 94/9/EC
•
With heavy starting (paper, cement, metal and water
industries)
•
In high-availability plants (chemical, oil, raw material
processing industries, power plants)
Safety technology for SIMOCODE pro
The safe disconnection of motors in the process industry is be-
coming increasingly important as the result of new and revised
standards and requirements in the safety engineering field.
With the DM-F Local and DM-F PROFIsafe fail-safe expansion
modules it is easy to integrate functions for fail-safe disconnec-
tion into the SIMOCODE pro V motor management system while
retaining service-proven concepts. The strict separation of
safety functions and operational functions proves particularly
advantageous for planning, configuring and construction.
Seamless integration in the motor management system leads to
greater transparency for diagnostics and during operation of the
system.
Suitable components for this purpose are the DM-F Local and
DM-F PROFIsafe fail-safe expansion modules, depending on the
requirements:
•
The DM-F Local fail-safe digital module for when direct
assignment between a fail-safe hardware shutdown signal
and a motor feeder is required, or
•
The DM-F PROFIsafe fail-safe digital module for when a fail-
safe controller (F-CPU) creates the signal for the discon-
nection and transmits it in a fail-safe manner through
PROFIBUS/PROFIsafe
or PROFINET/PROFIsafe to the motor management system
■
More information
Configuration instructions when using an operator panel
with display and/or a decoupling module with SIMOCODE
pro V with PROFIBUS
If you want to use a decoupling module or an operator panel with
display in the SIMOCODE pro V system with PROFIBUS, then
the following configuration instructions concerning the type and
number of connectable expansion modules must be observed.
The following tables show the maximum possible configuration
of the expansion modules for the various combinations.
The DM-F Local and DM-F PROFIsafe fail-safe expansion
modules behave in this connection like digital modules for
standard applications.
Use of an operator panel with display
✓
Available
--
Not available
Use of a decoupling module
(voltage measurement in insulated networks)
✓
Available
--
Not available
1)
No bistable relay outputs and no more than 5 of 7 relay outputs active
simultaneously (> 3 s).
Use of a decoupling module
(voltage measurement in insulated networks)
in combination with an operator panel with display
✓
Available
--
Not available
1)
No bistable relay outputs and no more than 5 of 7 relay outputs active
simultaneously (> 3 s).
2)
No bistable relay outputs and no more than 3 of 5 relay outputs active
simultaneously (> 3 s).
3)
Analog module output is not used.
Digital
module 1
Digital
module 2
Analog
modules
Temperature
modules
Ground-fault
modules
Only operator panel with display for SIMOCODE pro V
(24 V DC or 110 ... 240 V AC/DC)
Max. 4 expansion modules can be used
Operator panel with display and current/voltage measurement
with SIMOCODE pro V (110 ... 240 V AC/DC)
Max. 3 expansion modules can be used or:
--
--
✓
✓
--
Digital
module 1
Digital
module 2
Analog
modules
Temperature
modules
Ground-fault
modules
SIMOCODE pro V (24 V DC)
✓
1)
✓
1)
✓
✓
✓
SIMOCODE pro V (110 ... 240 V AC/DC)
✓
✓
--
✓
✓
✓
1)
✓
1)
✓
✓
--
✓
--
✓
✓
--
✓
--
✓
--
✓
Digital
module 1
Digital
module 2
Analog
modules
Temperature
modules
Ground-fault
modules
SIMOCODE pro V (24 V DC)
✓
--
✓
✓
✓
✓
✓
--
✓
✓
SIMOCODE pro V (110 ... 240 V AC/DC)
✓
2)
--
✓
✓
✓
✓
✓
--
--
--
✓
1)
✓
1)
✓
3)
--
--
✓
--
--
✓
✓
© Siemens AG 2014