SIEMENS
2/599
Siemens IK PI · 2015
PROFINET/Industrial Ethernet
Communication for PC-based systems
CP 1612 A2
2
■
Overview
•
PCI card (32 bit; 33 MHz/66 MHz; 3.3 V/5 V Universal Key)
for the connection of PG/PC to Industrial Ethernet
•
1 x 10/100/1 000 Mbit/s RJ45 port, electrical
•
Automatic data transmission rate detection
(10/100/1 000 Mbit/s), with autosensing and autocrossover
function
•
Communication services via
- PROFINET
- ISO or TCP/IP transport protocol
- PG/OP communication
- S7 communication
- Open communication (SEND/RECEIVE)
•
Designed for use in industrial environments
•
The appropriate OPC servers and configuration tools are
included in the scope of supply of the respective communi-
cation software.
■
Benefits
•
Low commissioning overhead due to plug & play and
autosensing/autocrossover/autonegotiation (10/100/
1 000 Mbit/s)
•
Particularly suitable for industrial use in PCs that require a
smaller quantity structure and no integrated switching
functionality
•
Ideally suited to SOFTNET for Industrial Ethernet and
SOFTNET PN IO
•
Simple access to automation data via OPC as standard
interface
•
Uniform procedure and configuration functionality with NCM
PC and STEP 7
■
Application
The CP 1612 A2 supports the connection to Industrial Ethernet
(10/100/1 000 Mbit/s) for SIMATIC PG/PC and PCs with a PCI
slot. It is designed for use in an industrial environment and can
be operated with all SOFTNET for Industrial Ethernet and
SOFTNET PN IO packages.
■
Design
The CP 1612 A2 module (PCI card 32-bit; 33 MHz/66 MHz;
3.3 V/5 V Universal Key) is inserted directly into a
SIMATIC PG/PC or in a PC and requires a PCI slot.
•
1 x RJ45 connection with 10/100/1 000 Mbit/s (half/full duplex)
•
Installation through PCI standard mechanisms (Plug & Play)
■
Function
The CP 1612 A2 offers the following accesses:
•
Level 2:
interface for PC networks in the industrial environment
•
Level 4 and Level 7:
economical access to Industrial Ethernet, e.g. to
SIMATIC S5/S7 in connection with SOFTNET packages for
Industrial Ethernet.
In addition, the protocols for Industrial Ethernet provided by the
operating system are supported.
The IT functionality is provided in combination with the Windows
software of the PC.
User interfaces
OPC interface
The OPC server included in the respective software package
can be used as the standard programming interface for the pro-
tocols S7 communication and open communication, in order to
connect automation technology applications to OPC-compatible
Windows applications (Office, HMI systems, etc.)
Diagnostics
•
Integration into network management systems through the
support of SNMP
Configuration
•
The S7 communication and open communication protocols
are configured in STEP 7 V5.1 SP3 or higher or NCM PC V5.1
SP2 or higher.
•
A configuration tool is included in the scope of delivery of the
CP 1612 A2 software packages.
*B,.43BAAB4348;
,?
>:2>8
9*279
79&
1=9
95
?&92
@'9
,>7
© Siemens AG 2014