SIEMENS
2/595
Siemens IK PI · 2015
PROFINET/Industrial Ethernet
Communication for PC-based systems
CP 1616
2
■
Overview
•
PCI module for connecting PCs and SIMATIC PGs/PCs to
PROFINET IO (Universal Keyed 3.3 V and 5 V;
33 MHz/66 MHz; 32-bit, runs in 64-bit PCI-X systems)
•
Full/half duplex with autonegotiation
•
With Ethernet real-time ASIC ERTEC 400
•
Integral 4-port real-time switch
•
Communication services:
- PROFINET IO controller and/or PROFINET IO device
- Support of IRT in motion control applications
•
High performance through direct memory access
•
Integration in network management systems through the
support of SNMP
•
Comprehensive diagnostics possibilities for installation,
start-up and operation of the module
•
Powerful configuration tools are part of the scope of delivery
of the module
■
Benefits
•
Connection of field devices to Industrial Ethernet with
PROFINET
•
Ideally suited for design of small local networks through
integral 4-port real-time switch
•
Direct memory access to process data by linking as
PROFINET IO-Controller via IO-Base interface
•
High computing power is available in the PC by taking the
load off the host CPU by means of a real-time ASIC
ERTEC 400 with support of the PROFINET real-time features
RT and IRT
•
Implementation in Motion Control applications thanks to
support of IRT
•
Energy savings thanks to support of PROFIenergy
•
Simple transfer to various operating system environments
using Development Kit DK-16xx PN IO
•
Switch mode also with the PC switched off, via optional
external power supply (in RT mode only)
•
Uncrossed connecting cables can be used due to the
integrated autocrossover function
■
Application
The CP 1616 enables SIMATIC PGs/PCs and PCs equipped with
a PCI slot to be connected to PROFINET IO.
The CP 1616 provides high-performance support for control
tasks on the PC (PC-based control, numeric control,
robot control).
With IRT (isochronous real-time), the CP is ideally suited to
time-critical applications that are in the range of isochronous
closed-loop control in the motion control sector.
The integrated 4-port switch supports low-cost system solutions
and the configuration of different topologies.
The CP 1616 provides SIMATIC programming devices/PCs and
industrial PCs with communication functions as:
•
PROFINET IO controller and/or PROFINET IO device
The HARDNET-PN
IO Development Kit enables integration of the
module into any operating systems.
■
Design
•
Industrial Ethernet
- Ethernet real-time ASIC ERTEC 400
- 4 x RJ45 connection
- Integral 4-port real-time switch for 10/100 Mbit/s Ethernet
- Half/full duplex
- Autosensing/Autonegotiation/Autonegotiation
•
PCI interface:
- PCI 2.2
- 32-bit, for execution in 64-bit PCI X systems
- 33 MHz or 66 MHz
- Universal Keyed 3.3 V and 5 V
- Installation through PCI standard mechanisms (Plug & Play)
•
Host interface/processor:
- Dual-port RAM on board
- Flash for program memory onboard
- ARM 946 RISK processor (32-bit) onboard for
preprocessing
•
Power supply:
- Operating voltage: 5 V through PCI
- Optional external 6 to 9 V DC supply for switch operation
with PC switched off
• Size:
- Short PCI format
G_IK10_XX_10159
IT
S7/S5
PG/OP
OPC
MRP
PN
TCP/
UDP
ISO
© Siemens AG 2014