SIEMENS
2/396
Siemens IK PI · 2015
PROFINET/Industrial Ethernet
Industrial Ethernet Layer 3 Switches / Routers
SCALANCE XR-500 managed
2
■
Overview
The Layer 3-enabled SCALANCE XR-500 Industrial Ethernet
switches are fully modular, high-performance, industry-standard
switches for the construction of electrical and optical line, ring
and star topologies with data transfer rates of up to 10 Gbit/s,
designed for installation in 19" control cabinets.
•
Four optical interfaces (10 Gbit/s) and up to 48 electrical
and/or optical interfaces (10/100/1 000 Mbit/s), of which up to
12 electrical PoE interfaces;
up to twelve electrical and/or optical 4-port media modules
can be plugged into the basic unit at any point.
•
Fast media redundancy due to the integrated redundancy
manager:
Redundant connection of rings by means of high-speed
media redundancy is also possible with SCALANCE XR-500.
•
Seamless integration of automation networks into existing
corporate networks thanks to support for a host of IT standard
functions (VLANs, IGMP-Snooping/Querier, STP/RSTP/MSTP,
Link Aggregation, Quality of Service, 802.1X and optional
static routing, RIP, OSPF, VRRP for IPv4 and IPv6)
•
PROFINET diagnostics, Web browser, CLI and SNMP
•
Redundant integration into higher-level networks through
support for standardized redundancy procedures (Multiple
Spanning Tree Protocol, Spanning Tree Protocol, Rapid
Reconfiguration Spanning Tree Protocol, Media Redundancy
Protocol) and standardized IP routing protocols or procedures
(Routing Information Protocol, Open Shortest Path First, Virtual
Router Redundancy Protocol)
•
KEY-PLUG as the swap medium with which Layer 3 routing
functions can be enabled.
- For the automatic backup of configuration data. If a fault
occurs, it allows fast and simple device replacement of
SCALANCE X-500 components without a Field PG (contains
the function of the C-PLUG)
-
Can be used in all Layer 2 variants of the SCALANCE XR552
and XR528
- For a detailed description, see "SCALANCE Accessories for
Layer 3 Switches / Routers"
Product versions
SCALANCE XR552-12M
•
LEDs and ports on the front
•
Alternatively: LEDs on the front and ports at the rear
•
Connection of power supply unit at rear or above/below the
switch
•
Four SFP+ slots for equipping with 10 Gigabit Ethernet SFP+
plug-in transceivers or Gigabit SFP plug-in transceivers
•
12x 4-port media module slots
•
Available with integrated IP routing functions or for the
optional extension of the IP routing functions by means of
KEY-PLUG
SCALANCE XR528-6M
•
LEDs and ports on the front
•
Alternatively: LEDs on the front and ports at the rear
•
Connection of power supply unit at rear or above/below the
switch
•
Four SFP+ slots for equipping with 10 Gigabit Ethernet SFP+
plug-in transceivers or Gigabit SFP plug-in transceivers
•
6x 4-port media module slots
•
Available with integrated IP routing functions or for the
optional extension of the IP routing functions by means of
KEY-PLUG
SCALANCE XR524-8C
•
Eight combo-ports for optional use of optical or electrical inter-
faces with 10/100/1 000 Mbit/s optically or electrically via SFP
plug-in transceiver
•
16 electrical ports operating at 10/100/1 000 Mbit/s
•
In total, 24 ports can be used
•
Power supply versions 24 V and 230 V (integrated)
•
Available with integrated IP routing functions or for the
optional extension of the IP routing functions by means of
KEY-PLUG
■
Benefits
•
Unlimited flexibility during network expansions (e.g. more
terminals, higher data transfer rates, PoE ports) or conversion
(e.g. switching from copper to fiber-optic cable) and reduction
of the storage costs due to the fully modular construction
using SFPplus/SFP and media modules
•
Retrofitting the Layer 3 switching functions (IP routing) by
means of a license on KEY-PLUG without replacing the
existing hardware
•
Changing the media modules during operation
•
High availability of the network thanks to
- redundant power supply
- redundant network structures based on FOC or Twisted Pair
(redundancy manager, standby function and STP/RSTP/
MSTP integrated)
- easy device replacement by means of plug-in C-PLUG/
KEY-PLUG swap medium
- very fast reconfiguration of the network in event of a fault
•
Thanks to the support of the Dual Stack Routing function, IPv4
networks and IPv6 networks can overlap and be operated in
parallel
•
High flexibility thanks to variable mounting options of the
power supply unit and device variants with ports on either the
front or rear of the device.
© Siemens AG 2014