SIEMENS
2/92
Siemens IK PI · 2015
PROFINET/Industrial Ethernet
Cabling technology
IE FC RJ45 Modular Outlet
2
■
Design
IE FC RJ45 Modular Outlet (base modules)
•
Robust metal housing, complies with Category 6 of the inter-
national cabling standards ISO/IEC 11801 and EN 50173
•
Suitable both for DIN rail and wall mounting
•
Thanks to its high degree of protection IP40, it can be
mounted directly on site
Ports:
•
8 insulation displacement contacts for connection of the
8-core Industrial Ethernet FC installation cables
•
Interface for insertion of a replaceable insert with one or
two RJ45 sockets or one RJ45 socket and one terminal for
24 V DC voltage supply (outlet insert, outlet power insert).
Mounting instructions
5
4
3
2
1
9
8
7
6
Outlet assembly complete
Outlet ready for use
Exchanging the insert: Insert can be
replaced while basic housing is closed
by pulling it past the pre-engaged
position.
Connect cable:
Press down insulation displacement
contacts
Close cover
Push insert into end position. Tighten the
interlocking screws of the strain-relief,
push insert in, tighten jack screw
As delivered
Release insert with jack screw
and pull into pre-engaged position
Connect cable
Wires
in the
guides
Basic housing
Open
cover
Insert
cable
Jack screw
Locking screws accessible
in pre-engaged position
G_IK10_XX_30029
© Siemens AG 2014