![](https://www.globalindustrialsupplies.eu/wp-content/uploads/2016/08/siemens-gallery-4-324x200.jpg)
1/12
Siemens D 84.9 · 2015
1
Introduction
Options
Description of options
■
Overview
Order Code
Description
Remark
Monitoring of stator windings
A65
6 embedded resistance thermometers Pt100 for 2-, 3- or 4-wire connection from
terminal box without lightning arresters
1)
Standard
2
×
A65
12 embedded resistance thermometers Pt100 for 2-, 3- or 4-wire connection from
terminal box without lightning arresters
1)
Monitoring of bearings
A40
2 resistance thermometers Pt100 for 2-, 3- or 4-wire connection from terminal box for
anti-friction bearings
1)
A41
2 resistance thermometers Pt100 for 2-, 3- or 4-wire connection from terminal box for
sleeve bearings
1)
A42
2 double resistance thermometers Pt100 for 2-, 3- or 4-wire connection from termi-
nal box for anti-friction bearings
1)
A43
2 double resistance thermometers Pt100 for 2-, 3- or 4-wire connection from termi-
nal box for sleeve bearings
1)
A70
2 dial-type thermometers without contacts
A71
2 dial-type thermometers with contacts
G50
Shock pulse measuring nipple (SPM) at DE and NDE
Standard
H05
Shock pulse measurement, fixed sensors and distributor box
H07
Shock pulse measurement (SPM), complete alarm box
Monitoring of ventilation
A44
1 resistance thermometer Pt100 for 2-, 3- or 4-wire connection from terminal box,
for cold air temperature
1)
A45
1 resistance thermometer Pt100 for 2-, 3- or 4-wire connection from terminal box,
for hot air temperature
1)
A46
1 double resistance thermometer Pt100 for 2-, 3- or 4-wire connection from terminal
box, for cold air temperature
1)
A47
1 double resistance thermometer Pt100 for 2-, 3- or 4-wire connection from terminal
box, for hot air temperature
1)
A86
1 dial-type thermometer with 2 NO-Contacts for cold air temperature incl. terminal
box
A87
1 dial-type thermometer with 2 NO-Contacts for hot air temperature incl. terminal
box
Other monitoring
A03
Speed monitoring using an inductive proximity switch, Pepperl + Fuchs, incl. termi-
nal box, without evaluation unit
H08
Leakage water detection
Special winding
C20
Special winding
Heater
M12
Anti-condensation heater for 110 to 120 V
M13
Anti-condensation heater for 220 to 240 V
Terminal box
L54
Terminal box 1XB8 751, 6 terminals with cable gland for 2 cable entries for line con-
nection with rated current > 315 A
L59
Terminal box 1XB8 911, for 1 cable entry
Terminal box mounting positions
K10
Terminal box on left hand side, view from DE
K83
Terminal box rotated through 90°, cable entry from DE
K84
Terminal box rotated through 90°, cable entry from NDE
K85
Terminal box rotated through 180°, cable entry from above
1)
In standard configuration 2 terminals are allocated per Pt100 tempera-
ture sensor. 3- or 4-wire temperature monitoring systems can be con-
nected by using cable end sleeves for crimping 2 leads into one sleeve.
For this purpose twin sleeves are available from several suppliers. Differ-
ent configurations of auxiliary terminals for separate 3 terminals or 4 ter-
minals connections are available on request.
© Siemens AG 2015