![](https://www.globalindustrialsupplies.eu/wp-content/uploads/2016/08/siemens-gallery-4-324x200.jpg)
9/6
Siemens MD 50.1 · 2015
Motor integrated frequency inverter SINAMICS G110M
0.37 kW to 4 kW
SINAMICS G110M distributed frequency inverters
9
■
Overview
(continued)
Safety Integrated
The distributed SINAMICS G110M inverters are already
equipped with the integrated STO safety function (Safe Torque
Off, certified in accordance with IEC 61508 SIL 2 as well as
ISO 13849-1 Category 3 and PL d). It can be activated either
over PROFIsafe or over the safety input.
■
Benefits
Fast commissioning
•
Preconfigured with SIMOGEAR
•
Loop-through of 24 V DC and 400 V 3 AC and communication –
no T-distributor necessary
•
Internal braking resistors – typical applications can be
implemented without external braking resistors
•
Rugged, with IP65/66 degree of protection,
up to 55 °C ambient temperature
•
Commissioning via fieldbus
Fast commissioning on site
•
Local commissioning via DIP switch, standard USB interface
and potentiometer or Intelligent Operator Panel (IOP)
•
Plug-in connections for 400 V 3 AC and 24 V DC, plug-in I/Os
and communication
•
Local diagnostics with LEDs
•
Uploading, saving and cloning of parameters with
SINAMICS SD card and IOP Intelligent Operator Panel
Full functionality
•
Integrated safety functions (STO locally via F-DI or via
PROFIsafe)
•
PROFINET communication to PROFIBUS at no extra cost
•
Integrated communication: USS, Modbus RTU, PROFIBUS,
PROFINET and EtherNet/IP
•
Basic PLC functions and additional conveyor technology
functions
•
I/O can be used as distributed I/O of the PLC
Efficient engineering
•
Fully integrated in Totally Integrated Automation, Totally
Integrated Automation Portal and Integrated Drive System
•
Automatic diagnostics in combination with SIMATIC controller
Flexible commissioning
•
Integrated, specific software functionality for conveyor
systems:
- Quick stop function for fast reaction times to sensors
- Limit switch functionality, e.g. for rotary table, corner
transfer unit
•
Use of the same software tools (STARTER and
SINAMICS Startdrive) as for all SINAMICS drives
■
Design
The SINAMICS G110M distributed inverters are modular fre-
quency inverters for standard drives. Each SINAMICS G110M
comprises two operative units:
a Power Module and a Control Unit.
Fig. 9/3
SINAMICS G110M Control Unit CU240M PN
plug-in and Power Module PM240M FSA 1.5 kW
Power Modules
Fig. 9/4
SINAMICS G110M Power Module PM240M FSA 1.5 kW
The following PM240M Power Modules are available for the
SINAMICS G110M distributed inverters:
PM240M Power Modules
Rated power
Frame size
0.37 kW
FSA
0.75 kW
FSA
1.1 kW
FSA
1.5 kW
FSA
2.2 kW
FSB
3 kW
FSB
4 kW
FSB
© Siemens AG 2015