![](https://www.globalindustrialsupplies.eu/wp-content/uploads/2016/08/siemens-gallery-4-324x200.jpg)
4/12
Siemens CR 1 · 2015
4
SIMOCRANE CMS Crane Management System
SIMOCRANE CMS Lean and CMS Basic
Multi-user
■
Overview
For multi-user systems, standard CMS stations are to be used in
combination with different options for remote access of data
from different locations. Such options are mainly used for large
cranes in the harbor terminals where several persons operate
the system at the same time.
Remote access to the local CMS stations is also possible, this is
also referred to as "Remote CMS" (RCMS) in the cranes sector.
In the case of large crane systems, this is usually performed in
a central maintenance building. In case of a fault, diagnostic in-
formation can be called up beforehand. In the best case scena-
rio, a fault can be rectified in this way.
Use of several cranes with remote access
Example of requirements for SIMOCRANE CMS:
•
Acquisition of productivity data and archiving
•
Alarm/event reporting system with archiving
•
Error logs and productivity data logs
•
Replay of crane data (playback function)
•
Visualization of the crane and individual components
•
CMS computer is installed in the electrical room
•
Crane driver must have an operator panel in the cabin
•
Remote access must be possible from a maintenance buil-
ding
Solution:
•
SIMOCRANE CMS Lean with one (1) WebClient
Article No.
6GA7214-1AA00-0AA0
or
SIMOCRANE CMS Basic with one (3) WebClients
Article No.
6GA7214-1AB00-0AA0
•
Panel PC 477 as operator panel for the crane driver and in
the checker cabin, e.g.: Article No.
6AV7240-6DD17-0PA0
•
Rack PC 647 as the CMS PC in the electrical room, e.g.:
Article No.
6AG4112-2GP30-0BX0
•
Standard PC in the maintenance building with remote crane
access via Internet Explorer (Web)
Further information: See "Technical specifications", "Selection
and ordering data" and SIMATIC HMI Catalog ST 80
.
G_CR01_XX_00256
G_CR01_XX_00258a
© Siemens AG 2015