SEW EURODRIVE
190
MF.. and MQ..
Ieldbus interfaces
MFE52 ²eldbus interface for PROFINET IO
Features
–
Connection of MOVIMOT
®
and MOVI-SWITCH
®
drives to the standardized ²eldbus systems
PROFIBUS, INTERBUS, DeviceNet™, AS-Interface, PROFINET IO, SBus
PLUS
/EtherCAT
®
and
NEW
EtherNet/IP™
–
Fieldbus interfaces are based on a module terminal box with connecting terminals and a
pluggable ²eldbus module; these ²eldbus interfaces can be mounted directly on the drive,
in the ²eld, or in the ²eld distributor
–
The adjustable-speed MOVIMOT
®
drive is connected to the bus using terminals; additional
sensors, actuators or MOVI-SWITCH
®
gearmotors without control can be connected to the
bus using terminals or M12 plugs depending on the design
–
Easy fault diagnostics via bus in the event of a malfunction by means of diagnostic interfaces
and LED signals
–
Reading sensor signals
–
Controlling actuators via digital input and output terminals
– Degree of protection IP65
–
Option package: Degree of protection IP66, stainless steel cable glands, pressure compensation
²tting, M12 metal plug for ²eldbus modules with M12 plug connectors
In addition, optionally integrated controller with the following functions:
–
Programmable via IPOS
plus®
–
Simple positioning with EI76 incremental encoder
–
Integrated I/O preprocessing and timing elements
–
Protocol modi²cation
Options for Ieldbus interfaces
MF.. / MQ..
–
The
MFG11A keypad
is plugged on any MFZ.. connection module instead of a ²eldbus
interface for manually controlling a MOVIMOT
®
drive
–
DBG60B keypad
for manually controlling MOVIMOT
®
drives; additionally, the process
data words can be displayed in monitor mode; direct connection to the diagnostic interface
of MOVIMOT
®
or the MF../MQ.. ²eldbus interface
Hybrid cables
–
Cables that combine energy transfer, control voltage, and communication in one cable sheath
(SEW-EURODRIVE in-house development) ensure optimum EMC shielding and impedances
–
The hybrid cable for connecting MOVIMOT
®
to ²eld distributors combines the communication
interface and supply and control voltage connections in one cable and is supplied as a pre-
fabricated cable with plug connector
–
MOVIMOT
®
drives with connected hybrid cable can be connected to the ²eld distributor in a
matter of seconds and are ready for operation
–
Simple handling in case of service: The connector can be disconnected without any danger,
the drive can be replaced and the new drive re-connected quickly
–
Ideal for all systems with high demands on availability
Decentralized drives / mechatronics
DI0
DI2
DI4
DI5
DO0
RUN
BUS-F
link/act1
SYS-F
MFE52A Ethernet
link/act2
Fieldbus interfaces, field distributors and cable systems
5.1 Gearmotors with inverter MOVIMOT
®