SEW EURODRIVE
371
Power mode
Accelerate
The peak load for the acceleration procedure is
fully provided from the storage bundle. Only the
losses due to the system efficiency are taken from
the supply system. This way, energy consumption
from the supply system is limited and the grid load
is considerably reduced.
Travel
During constant travel, the required nominal power
for balancing the system losses are taken from the
supply system. In addition, it would be possible to
load the storage bundle through the supply system.
Brakes
The regenerative energy is stored directly in the
storage bundle and is thus available for the appli-
cation again. At the same time, heat transmission
by the braking resistor that is no longer neces-
sary is avoided. In addition, the supply system is
not strained by the additional reactive power and
harmonics.
12
1)
Depends on application configuration
1)
Depends on application configuration
1)
Depends on application configuration