CHIORINO
< Previous chiorino products | Products index | Next chiorino products >
▸ guides, profiles and sidewalls fitted by means of high frequency and hot air welding machines
▸ perforations
Belts can be supplied endless spliced or with prepared ends for on-site splicing, to be done with dedicated solutions and CHIORINO designed equipment.
For the glueing of its transmission belts CHIORINO supplies special cement kits complete with directions for use.
The polyester belts can be made endless without use of
cements in a very short time with the CHIORINO Fast Joint
system and equipments (see page 24).
The range
Thermoplastic transmission belts with traction core in POLYESTER and elastomer covering.
▸ DG-E HS series: suitable for folder-gluers in the cardboard industry, as an alternative to the traditional nylon belts of the DG HS series.
Transmission belts with traction core in POLYAMIDE.
▸ T series: specially designed for tangential drives in the textile industry. The high-quality features are: rectilinear and quiet running, antistatic, optimum grip, energy saving, resistance to abrasion, heat, oil, dust, are obtained in every field. Suitable for multiple drives. The T-T series yellow-black provide straight running and dimensional stability to an outstanding degree. The OE type is specially designed to suit the newest open- end spinning frames.
▸ DG HS series: these double rubber faced belts have special elastomers which maintain continuous frictional values. Antistatic. Suitable for: folder-gluer machines, tube winders, post office machinery and in the graphic arts industry, multiple drives, etc.
▸ P series: suitable for both light and medium drives: power operated tools, auxiliary drives in the textile and mechanical industry, etc. Installed as conveyor belts in the packaging and graphic arts industries. Antistatic.
▸ Z series: suitable for both medium and high horsepower drives; extremely abrasion resistant; oil, grease proof; antistatic. Designed to perform well in difficult working conditions. Recommended for: pumps, ventilators, mixers, rolling-mills,turbines saws for marble, chippers, etc.
▸ LT series: belts with chrome leather driving surface. Contrary to belts with synthetical covers, LT belts are recommended for all drives subject to violent over loads since the leather driving surface allows temporary slipping without burning. Suitable for: conic drives, drives with belt-shifters, chippers, crushers, paper mills, etc. Suitable for cross drives.
▸ LL series: belts with double chrome leather covers.
The same characteristics and applications envisaged for the
LT series apply also to the LL series. Suitable for multiple
drives and cross drives.
Production program
18
material | colour | coefficient of friction on steel | material | colour | coefficient of friction on steel | [mm] | [kg/m2] | [mm] | [N/mm] | [N/mm] | [°C] | [°C] | ||
Traction core
Driving surface
Total thickness
Weight
Minimum diameter (1)
Pull for 1% elongation
Tensile strenght
Temperature
resistance
Type
Top surface
BELTS WITH POLYESTER TRACTION CORE
DG-E 10/30 HS | elastomer | n | 0.7 | polyester | elastomer | n | 0.7 | 3.0 | 3.5 | 30 | 10.0 | 180 | -20 | 80 |
DG-E 10/40 HS | “ | n | 0.7 | “ | “ | n | 0.7 | 4.0 | 5.0 | 40 | 10.0 | 180 | -20 | 80 |
DG-E 10/50 HS | “ | n | 0.7 | “ | “ | n | 0.7 | 5.0 | 6.0 | 60 | 10.0 | 180 | -20 | 80 |
DG-E 10/60 HS | “ | n | 0.7 | “ | “ | n | 0.7 | 6.0 | 7.0 | 60 | 10.0 | 180 | -20 | 80 |
T series | ||||||||||||||
T0 | elastomer | n | 0.7 | polyamide | elastomer | n | 0.7 | 1.4 | 1.5 | 20 | 2.0 | 80 | 0 | 100 |
T1 | “ | n | 0.7 | “ | “ | n | 0.7 | 1.7 | 1.8 | 25 | 5.0 | 200 | 0 | 100 |
T1R | “ | n | 0.7 | “ | “ | n | 0.7 | 2.1 | 2.3 | 25 | 5.0 | 200 | 0 | 100 |
T2 | “ | n | 0.7 | “ | “ | n | 0.7 | 2.3 | 2.6 | 60 | 7.5 | 300 | 0 | 100 |
T2R | “ | n | 0.7 | “ | “ | n | 0.7 | 3.2 | 3.6 | 75 | 7.5 | 300 | 0 | 100 |
T3 | “ | n | 0.7 | “ | “ | n | 0.7 | 2.6 | 2.8 | 100 | 10.0 | 400 | 0 | 100 |
T3R | “ | n | 0.7 | “ | “ | n | 0.7 | 3.4 | 3.7 | 100 | 10.0 | 400 | 0 | 100 |
T4 | “ | n | 0.7 | “ | “ | n | 0.7 | 3.1 | 3.4 | 150 | 15.0 | 600 | 0 | 100 |
T4R | “ | n | 0.7 | “ | “ | n | 0.7 | 3.9 | 4.5 | 150 | 15.0 | 600 | 0 | 100 |
T4S | “ | n | 0.7 | “ | “ | n | 0.7 | 5.1 | 5.9 | 150 | 15.0 | 600 | 0 | 100 |
T1-T | elastomer | n | 0.7 | polyamide | elastomer | n | 0.7 | 1.8 | 2.1 | 25 | 5.0 | 200 | 0 | 100 |
T2-T | “ | n | 0.7 | “ | “ | n | 0.7 | 2.7 | 3.1 | 60 | 7.5 | 300 | 0 | 100 |
T3-O.E. | “ | n | 0.7 | “ | “ | n | 0.7 | 2.7 | 3.0 | 90 | 10.0 | 400 | 0 | 100 |
T3-T | “ | n | 0.7 | “ | “ | n | 0.7 | 2.9 | 3.4 | 100 | 10.0 | 400 | 0 | 100 |
T4-T DG HS series | “ | n | 0.7 | “ | “ | n | 0.7 | 3.4 | 3.7 | 150 | 15.0 | 600 | 0 | 100 |
DG1/15 HS | elastomer | n | 0.7 | polyamide | elastomer | n | 0.7 | 1.6 | 1.8 | 20 | 5.0 | 200 | 0 | 100 |
DG1/30 HS | “ | n | 0.7 | “ | “ | n | 0.7 | 3.0 | 3.4 | 30 | 5.0 | 200 | 0 | 100 |
DG1/40 HS | “ | n | 0.7 | “ | “ | n | 0.7 | 4.0 | 4.6 | 40 | 5.0 | 200 | 0 | 100 |
DG2/20 HS | “ | n | 0.7 | “ | “ | n | 0.7 | 2.4 | 2.8 | 40 | 7.5 | 300 | 0 | 100 |
DG2/30 HS | “ | n | 0.7 | “ | “ | n | 0.7 | 3.2 | 3.7 | 40 | 7.5 | 300 | 0 | 100 |
DG2/40 HS | “ | n | 0.7 | “ | “ | n | 0.7 | 4.0 | 4.8 | 50 | 7.5 | 300 | 0 | 100 |
DG2/60 HS | “ | n | 0.7 | “ | “ | n | 0.7 | 5.5 | 6.3 | 60 | 7.5 | 300 | 0 | 100 |
P series | ||||||||||||||
P0 | polyurethane | n | 0.3 | polyamide | elastomer | n | 0.6 | 0.9 | 1.0 | 15 | 2.0 | 80 | 0 | 100 |
PR0 | “ | n | 0.3 | “ | polyurethane | n | 0.3 | 1.0 | 1.1 | 20 | 3.0 | 120 | 0 | 100 |
P1 | “ | n | 0.3 | “ | elastomer | n | 0.6 | 1.4 | 1.5 | 25 | 5.0 | 200 | 0 | 100 |
P2 | “ | n | 0.3 | “ | “ | n | 0.6 | 2.1 | 2.3 | 50 | 7.5 | 300 | 0 | 100 |
Z series | ||||||||||||||
Z1 | polyurethane | n | 0.3 | polyamide | elastomer | n | 0.6 | 1.4 | 1.5 | 25 | 5.0 | 200 | 0 | 100 |
Z2 | “ | n | 0.3 | “ | “ | n | 0.6 | 2.3 | 2.8 | 60 | 7.5 | 300 | 0 | 100 |
Z3 | “ | n | 0.3 | “ | “ | n | 0.6 | 2.6 | 3.1 | 100 | 10.0 | 400 | 0 | 100 |
Z4 | “ | n | 0.3 | “ | “ | n | 0.6 | 3.4 | 3.9 | 150 | 15.0 | 600 | 0 | 100 |
Z6 | “ | n | 0.3 | “ | “ | n | 0.6 | 3.7 | 4.2 | 200 | 20.0 | 800 | 0 | 100 |
Z9 | “ | n | 0.3 | “ | “ | n | 0.6 | 4.9 | 5.8 | 300 | 30.0 | 1200 | 0 | 100 |
Z12 | “ | n | 0.3 | “ | “ | n | 0.6 | 5.6 | 6.3 | 400 | 40.0 | 1600 | 0 | 100 |
LT series | ||||||||||||||
LT0R | polyurethane | n | 0.3 | polyamide | leather | n | 0.4 | 2.4 | 2.7 | 30 | 3.0 | 120 | 0 | 80 |
LT1 | “ | n | 0.3 | “ | “ | n | 0.4 | 2.5 | 2.5 | 50 | 5.0 | 200 | 0 | 80 |
LT2 | “ | n | 0.3 | “ | “ | n | 0.4 | 3.1 | 3.1 | 75 | 7.5 | 300 | 0 | 80 |
LT3 | “ | n | 0.3 | “ | “ | n | 0.4 | 3.3 | 3.4 | 100 | 10.0 | 400 | 0 | 80 |
LT4 | “ | n | 0.3 | “ | “ | n | 0.4 | 3.8 | 4.0 | 150 | 15.0 | 600 | 0 | 80 |
LT6 | “ | n | 0.3 | “ | “ | n | 0.4 | 4.4 | 4.6 | 200 | 20.0 | 800 | 0 | 80 |
LT9 | “ | n | 0.3 | “ | “ | n | 0.4 | 5.6 | 5.9 | 300 | 30.0 | 1200 | 0 | 80 |
LT12 | “ | n | 0.3 | “ | “ | n | 0.4 | 6.1 | 6.8 | 400 | 40.0 | 1600 | 0 | 80 |
LL series | ||||||||||||||
LL0 L | leather | n | 0.4 | polyamide | leather | n | 0.4 | 3.2 | 3.2 | 50 | 2.0 | 80 | 0 | 80 |
LL1 | “ | n | 0.4 | “ | “ | n | 0.4 | 3.2 | 3.2 | 50 | 5.0 | 200 | 0 | 80 |
LL2 | “ | n | 0.4 | “ | “ | n | 0.4 | 4.0 | 4.1 | 75 | 7.5 | 300 | 0 | 80 |
LL3 | “ | n | 0.4 | “ | “ | n | 0.4 | 4.2 | 4.4 | 100 | 10.0 | 400 | 0 | 80 |
LL4 | “ | n | 0.4 | “ | “ | n | 0.4 | 4.8 | 5.0 | 150 | 15.0 | 600 | 0 | 80 |
LL6 | “ | n | 0.4 | “ | “ | n | 0.4 | 6.0 | 6.0 | 200 | 20.0 | 800 | 0 | 80 |
LL9 | “ | n | 0.4 | “ | “ | n | 0.4 | 7.2 | 7.6 | 300 | 30.0 | 1200 | 0 | 80 |
material | colour | coefficient of friction on steel | material | colour | coefficient of friction on steel | [mm] | [kg/m2] | [mm] | [N/mm] | [N/mm] | [°C] | [°C] | ||
Top surface
Traction core
Driving surface
Total thickness
Weight
Minimum diameter (1)
Pull for 1% elongation
Tensile strenght
Max. temperature
resistance
Type
(1) The above mentioned values depend on the running speed.
The data of this table has been formulated under normal environment conditions. They are subject to alteration without notice.
Top surface | P, PR, Z, LT | Polyurethane | |
DG-E HS, T, DG HS | Elastomer | ||
LL | Leather | ||
Traction core | P, PR, Z, T, DG HS, LT, LL | class 0÷6 | Mono ply polyamide |
class 9÷12 | Double ply polyamide | ||
DG-E HS | Polyester fabric | ||
Driving surface | PR | Polyurethane | |
DG-E HS, P, Z, T, DG HS | Elastomer | ||
LT, LL | Leather | ||