BALDOR
200
Inverter/Vector Motors & Controls
Farm Duty
Motors
Definite Purpose
Motors
Unit Handling Motors
Brake Motors
200 & 575 Volt
Motors
IEC Frame
Motors
50 Hertz
Motors
Inverter/Vector
Motors & Controls
DC Motors
and Controls
Soft Start & Dynamic
Brakes
Applications:
Variable torque, constant torque or constant horsepower
applications. New installations, replacements and original equipment manufactures
(OEM).
Features:
Volts per Hertz Control with peak overload capacity of 175%
and P± capability.
Flexible mounting options with IP20 enclosure as
standard and DIN Rail mounting.
±ntegral keypad, operator interface and
local speed control.
Basic set of programming parameters. Power ratings up to 5
Hp at 230V and 15 Hp at 460V versions.
VS1ST
AC Micro Drive
1/2 thru 1.5 Hp
1/2 thru 3 Hp
1/2 thru 5 Hp
1 thru 15 Hp
115 VAC
230 VAC
230 VAC
460 VAC
1 Phase - 50/60 Hz
1 Phase - 50/60 Hz
3 Phase - 50/60 Hz
3 Phase - 50/60 Hz
Performance Features
Control Modes
V/Hz
Operator Interface Module
Integral Drive Mounted
Display Lines
6-Character LED Display
Programmable Preset Speeds
Four
Analog Outputs
One (0-10 VDC)
Auto Restart
Yes – Up to 5 attempts
Frequency Avoidance
One Band
Fault History
Last Four Faults
Digital Inputs: Four
Two Programmable Digital Inputs, Two user selectable analog/digital inputs
Digital Inputs Type
Pull-Up
DrIv
e Specifications
Analog Inputs: Two
0-10VDC, 0 to 20mA or 4 to 20mA
Relay Outputs: One
Built-in Form C Relay
Analog Output/Digital Output
0-10 VDC: One Analog Usable for Meter (Freq., Current, Voltage) or Digital Output
Maximum Load
15 Hp @ 460 VAC
Overload Capacity
Drive Output 150% for one minute and 175% for 2 seconds
Input Voltage Ranges
115 VAC (99-126); 230 VAC (198-264); 460 VAC (342-528)
Rated Input Frequency
50-60Hz (³5%)
Carrier Frequency
4-32 kHz (8 kHz default)
Operating Temperature
0° to 50°C
Snubber (Dynamic Braking)
Built-in Transistor (Frames B & C)
Dynamic Braking External
Up to 150% Dynamic Braking with appropriately sized resistor
DC Injection Braking
Included
Volts/Hz
Linear V/Hz, Energy Optimizer Function
Frequency Control Range
0 - 500Hz
Accel/Decel:
Independently adjustable accel. & decel. ramps
Time Range:
0 to 600 Seconds
Keypad Speed Control
Yes
Sink/Source Inputs
Selectable, 24 VDC Logic
Electronic Overload Trip
Electronic Motor Overload Inverse 150% for 1 minute or 175% for 2 seconds
Communications
Built-in MODBUS-RTU (RS-485) Communications
PI Control
Built-in
Protective Features
Under Voltage
Level Depends on Voltage Class (240, 480, or 575)
Output Short Circuit
Phase-to-Phase on Drive Output
Over Temperature
Heatsink Monitor
DC Bus Overvoltage
DC Bus Level Trip
Drive Overload
Exceed Drive rating of 150% for One Minute or 175% for 2 seconds
Over Current
Over-current/short-Circuit protection
Output Phase
Trips on open Output Phase
Loss of Reference
Trips on Loss of Speed Command Signal
Comm. Error
Detects a communication error (fault)
Agency Certifications
UL, cUL, CE, C-tick
Service Conditions
Altitude
1,000 m (3,300 ft.), derate by 1% per 100m up to 2,000 on maximum.
Ambient Temperature
IP20: -10°C (14°F) to 50°C (122°F)
Storage Temperature
-40°C (-40°F) to 60°C (140°F)
Relative Humidity
10% to 95%, non-condensing